Technical data

112 ServerIron ADX Graphical User Interface Guide
53-1002412-01
SSL profiles
8
2. Select a profile you want to edit from the list or click New to create a new profile.
3. Provide the following information:
• Profile Name: Enter the name of the TCP profile.
• Nagle Algorithm: Select the check box to enable Nagle algorithm that is used to address
the problem when an application generates several small bytes of data at a time.
• Delayed ACK Algorithm: Select the check box to send few acknowledgement (ACKs) per
data segment using a TCP delayed ACK mechanism.
• PUSH Bit: Select the check box to enable PUSH flag in all the outgoing data packets except
when emptying the TCP transmit queue.
• Transmit Queue Size: Enter the size of the TCP transmit queue.
• Receive Queue Size: Enter the size of the TCP receive queue.
4. Click Apply to create a TCP profile.
Click Reset to revert the configuration to the previous configured values.
Binding the profiles
Before binding the profiles, make sure the following have been created:
• Virtual Server. For more information on creating virtual server, refer to “Creating a virtual
server” on page 49.
• Virtual Server Port. For more information on creating a virtual server port, refer to “Creating a
virtual server port” on page 52.
• SSL profile. For more information on creating SSL profiles, refer to “SSL profiles” on page 108.
After creating the SSL profile, you must bind the profiles with the virtual server ports. The SSL
acceleration on the device can be configured to operate in one of the following two modes:
• SSL termination mode—An SSL connection is maintained between a client and an ADX device
and the connection is not encrypted.
• SSL full proxy mode—One SSL connection is maintained between a client and a device and a
separate SSL connection between a device and server.
To bind the SSL profiles on the device, perform the following steps within the Configure tab.
1. Click Security on the menu bar.
2. From the sidebar, select SSL, and then select SSL Profile Bindings.