Technical data

ServerIron ADX Graphical User Interface Guide 113
53-1002412-01
SSL profiles
8
The SSL Profile Bindings page is displayed, as shown in Figure 93.
FIGURE 93 Binding the profile
3. Click Bind SSL Profiles at the bottom of SSL Profile Bindings page.
The Add Profile Bindings page is displayed, as shown in Figure 94.
FIGURE 94 Adding profile bindings
4. Under Bind VIP Port to a Profile, select one of the SSL mode:
• If you select Terminate, enter the following information:
 Server Profile: Select an SSL profile from the list.
 TCP Profile: Select a TCP profile from the list.
• If you select Proxy, enter the following information:
 Client SSL Profile: Select an SSL profile from the list for client certificate verification.
 Server SSL Profile: Select an SSL profile from the list for server certificate verification.
5. Click Apply to save your entries.
Click Reset to revert the configuration to the previous configured values.
NOTE
Optionally, you can also bind a real server port to a virtual server port.
For more information on binding the SSL profiles, refer to the ServerIron ADX Security Guide.