Technical data

130 ServerIron ADX Graphical User Interface Guide
53-1002412-01
System summary
10
The Software Information pane is displayed, as shown in Figure 105.
FIGURE 105 Viewing software information
Table 11 describes the fields available in the Software Information pane.
Status Displays the status of the fan. The fan status can be one of the following:
• OK
• Stopped
• Stopped PWM100
• PWM Outbound
• Failed
• Bad Power
• Not Present
• I2C Access
Speed Displays the speed of the fan. The fan operate at the following speeds:
• Low - Indicates the speed is low (50% of the maximum RPM).
• Medium - Indicates the speed is medium (75% of the maximum RPM).
• Medium High - Indicates the speed is medium high (90% of the maximum RPM).
• High - Indicates the speed is high (100% of the maximum RPM).
RPM Displays the rotations made by the fan, in revolution per minute.
Disk Space
Disk Space Displays the total disk space on the device.
Used Displays the used disk space.
Available Displays the available disk space.
TABLE 11 Software Information pane
Field Description
Image Displays the image types installed on the device. The image types are as
follows:
• Running - Indicates the current image running on the device.
• Primary - Indicates the image that is set as primary.
• Secondary - Indicates the image that is set as secondary.
• Boot - Displays the boot version of the device.
Version Displays the release version of the software running on the device.
Image Name Displays the name of the image.
TABLE 10 Hardware Information pane (Continued)
Field Description