Technical data

ServerIron ADX Graphical User Interface Guide 131
53-1002412-01
System summary
10
The Module Information pane is displayed, as shown in Figure 106.
FIGURE 106 Viewing module information
Table 12 describes the fields available in the Module Information pane.
For more information on system summary, refer to the ServerIron ADX Administration Guide.
Build Type Displays the type of the build loaded in the device. The build type are as follows:
• Router - Indicates the type of the build is router.
• Switch - Indicates the type of the build is switch.
Build Date Displays the date on which the image is built.
TABLE 12 Module Information pane
Field Description
Temperature
Module Displays the module name. The module can be one of the following:
• MP - Indicates the module is a MP.
• BP - Indicates the module is a BP.
Current Temperature Displays the current temperature on the respective modules, in degree Celsius.
Warning Limit Displays the temperature threshold that has been set as the warning limit.
Shutdown Limit Displays the temperature threshold that has been set as the shutdown limit.
Modules
Slot Displays the slot number.
Module Name Displays the name of the module.
Status Displays the status of the module. The module status can be one of the following:
• ACTIVE
• RUNNING
# of Ports Displays the total number of ports in the module.
Serial Number Displays the serial number for the module.
TABLE 11 Software Information pane (Continued)
Field Description