Technical data

138 ServerIron ADX Graphical User Interface Guide
53-1002412-01
Interface statistics
11
Interface Type Displays the type of the selected interface.
STP State Displays the Spanning Tree Protocol (STP) state for the selected interface.
IPv6 Displays the status of IPv6 for the selected interface. The IPv6 status can be
one of the following:
• Enabled
• Disabled
Speed Displays the current speed on the selected interface.
Duplex Type Displays the current type of duplex on the selected interface.
Active Trunk Displays the state of active trunk on the selected interface. The active trunk
status can be one of the following:
• Enabled
• Disabled
Tag Mode Displays whether the selected interface is tagged or untagged.
MTU Displays the Maximum Transmission Unit (MTU) for the selected interface.
Statistics
Bit Rate Displays the number of bits received and transmitted per load interval on the
selected interface.
Packet Rate Displays the number of packets received and transmitted per load interval on
the selected interface.
Utilization% Displays the percentage utilization of the selected interface for receiving and
transmitting information.
Bytes Displays the number of bytes received and transmitted on the selected
interface.
Packets Displays the number of packets received and transmitted on the selected
interface.
Unicast Packets Displays the number of unicast packets received and transmitted on the
selected interface.
Broadcast Packets Displays the number of broadcast packets received and transmitted on the
selected interface.
Multicast Packets Displays the number of multicast packets received and transmitted on the
selected interface.
Errors
Errors Received Displays the total number of errors received on the selected interface.
Errors Transmitted Displays the total number of errors transmitted by the selected interface.
Collisions Received Displays the total number of collisions received on the selected interface.
Collisions Transmitted Displays the total number of collisions transmitted by the selected interface.
Runt Packets Received Displays the total number of runt packets received on the selected interface.
Giant Packets Received Displays the total number of giant packets received on the selected interface.
Received Packets Ignored Displays the number of received packets ignored on the selected interface.
CRC Errors Received Displays the total number of Cycle Redundancy Check (CRC) errors received on
the selected interface.
TABLE 15 Interface Details fields (Continued)
Field Description