Technical data

ServerIron ADX Graphical User Interface Guide 145
53-1002412-01
IP statistics
11
The TCP page is displayed, as shown in Figure 113. The total and the individual counts of IPv4
and IPv6 packets for the statistic types are displayed. To view the TCP statistics in the graphical
format, click Graph. To switch the view between tabular and graphical format, click the Details
or Graph on top right corner of the TCP page.
FIGURE 113 Displaying the TCP traffic
Table 19 describes the fields available in the TCP page.
For more information on TCP statistics, refer to the ServerIron ADX Switch and Router Guide.
UDP statistics
To view the UDP statistics on the device, perform the following steps within the Monitor tab.
1. Click Network on the menu bar.
2. From the sidebar, select IP, and then select UDP.
TABLE 19 TCP fields
Field Description
Active Open Connections Displays the number of TCP connections opened by the device by
sending a TCP SYN.
Passive Open Connections Displays the number of TCP connections opened by the device in
response to connection requests received from other devices.
Active Reset Connections Displays the number of TCP connections reset occurred on the
device at the other end of the connection as a result of sending a
TCP reset message to the device.
Passive Reset Connections Displays the number of TCP connections reset occurred when the
device at the other end of the connection sent a TCP reset
message.
Received Segments Displays the number of TCP segments received by the device.
Sent Segments Displays the number of TCP segments sent by the device.
Retransmitted Segments Displays the number of segments that the device retransmitted
before the device at the other end of the connection had
acknowledged receipt of the segment.