Technical data

156 ServerIron ADX Graphical User Interface Guide

53-1002412-01

Virtual servers

Virtual server ports

To view the virtual server port statistics on the device, perform the following steps within the

Monitor tab.

1. Click Traffic on the menu bar.

2. From the sidebar, select Virtual Servers.

3. Click Ports at the bottom of the Virtual Servers page.

Symmetric State Displays the state of the virtual server. The status can be one of the

following:

• Active - Indicates the virtual server is in active mode.

• Standby - Indicates the virtual server is in standby mode.

Symmetric Priority Displays the sym-priority that is associated with the virtual server.

# of Missed Keepalives Displays the number of missed Layer 4 or MAC PDUs.

# of Active Transitions Displays the number of times the device has changed the state

from standby mode to active mode.

# of Backup Transitions Displays the number of times the device has changed the state

from active mode to standby mode.

Total Connections Displays the total number of connections on the virtual server.

Transmitted Packets Displays the total number of packets transmitted by the virtual

server.

Received Packets Displays the total number of packets received by the virtual server.

VIP RHI Admin State Displays the admin status of the virtual server Route Health

Injection (RHI). The admin status can be one of the following:

• Enabled

• Disabled

VIP RHI State Displays the health of the virtual server. The health status can be

one of the following:

• Healthy - Indicates the virtual server is healthy.

• Not healthy - Indicates the virtual server is not healthy.

NOTE: If a virtual server port is not bound to any real server port,

then its health is not used to determine the health of the

virtual server.

TABLE 25 Virtual Server Details fields (Continued)

Field Description