Technical data

ServerIron ADX Graphical User Interface Guide 189
53-1002382-01
Chapter
15
Managing Software Images
In this chapter
•Uploading the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Uploading the software
You can upload a software image on the device from a Trivial File Transfer Protocol (TFTP) server.
While uploading the image, make sure that there are no power failures.
To upload the software image from the TFTP server, perform the following steps within the Maintain
tab.
1. Click Software Upload on the menu bar.
The Software Upload page is displayed, as shown in Figure 141.
FIGURE 141 Uploading the software
2. Provide the following information:
• TFTP Server: Enter the IP address of the TFTP server.
• Software Image: Enter the name of the software image.
• Image Flash: Click Primary or Secondary image flash in which you want to upload the
software image. By default, the primary flash image is selected.
• Save Configuration before reboot: Select the check box to save the running configuration
before reboot.
3. Click Upload to start uploading the software image from the TFTP server to the selected image
flash.