Technical data

ServerIron ADX Graphical User Interface Guide 19
53-1002412-01
Chapter
5
System Settings
In this chapter
•General settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
•High Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
•User management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
General settings
After you login to the web interface, you can configure the basic system information to identify your
device in the network and set the system limits to control the memory usage.
Configuring basic system settings
You can configure the basic system settings including host name, Simple Network Time Protocol
(SNTP) server address, and chassis information. To configure the basic system settings on the
device, perform the following steps within the Configure tab.
1. Click System on the menu bar.
2. From the sidebar, click General.
The System Configuration page is displayed, as shown in Figure 4.
FIGURE 4 Configuring the general settings