Technical data

ServerIron ADX Graphical User Interface Guide 21
53-1002412-01
General settings
5
The System Limits page is displayed, as shown in Figure 5.
FIGURE 5 Configuring system limits
3. Provide the following information:
• VLANs: Enter the maximum number of Virtual Local Area Networks (VLANs) you want to
assign to a group. The range is from 1 through 4095. The default value is 64.
• L3 VLANs: Enter the maximum number of Layer 3 VLANs you want to configure on the
device. The range is from 0 through 256. The default value is 32.
• L4 Virtual Servers: Enter the maximum number of Layer 4 virtual servers you want to
configure on the device. The range is from 64 through 1024. The default value is 256.
• L4 Real Severs: Enter the maximum number of Layer 4 real servers you want to configure
on the device. The range is from 64 through 4096. The default value is 1024.
• L4 Server Ports: Enter the number of Layer 4 server ports you want to configure on the
device. The range is from 256 through 8192. The default value is 2048.
• Sessions: Enter the maximum number of active sessions you want to allow on a device.
The range is from 1024 through 163840. The default value is 4096.
• SSL Profiles: Enter the maximum number of Secure Socket Layer (SSL) profiles you want to
create. The range is from 64 through 1024. The default value is 256.
• SSL Certificate Size: Enter the maximum size of the SSL certificate. The range is from
2048 through 16384. The default value is 6144.
• SSL Connections: Enter the maximum number of concurrent SSL connections you want to
establish on the device. The range is from 512 through 16384. The default value is 8192.
• SSL v2 Connections: Enter the maximum number of concurrent SSL v2 connections you
want to allow on the device for a second. The range is from 16 through 512. The default is
64.
4. Click Apply to save your entries.
Click Reset to Defaults to change all the configured values to the default values. Click Reset to
revert the configuration to the previous configured values.