Technical data

ServerIron ADX Graphical User Interface Guide 31
53-1002412-01
User management
5
NOTE
The options in the Role Based Settings tab are enabled only when you click Role Based
User type. For more information on the configuration of role-based user, refer to “Assigning
user role” on page 31.
• Change Password: Select the Yes check box to change the password.
• Password: Enter the password with a minimum of eight characters. The password is always
masked to ensure security.
• Confirm Password: Enter the password again for confirmation.
• Password Expiry Time (days): Enter the number of days for the password validity. The range
is from 1 through 365 days. The default is 90 days.
5. Click Apply to save your entries.
Click Reset to revert the configuration to the previous configured values.
To modify the configured user information, in the Summary table, select an entry and click Edit or
double-click the entry. You can also delete a user by clicking Delete.
NOTE
You cannot delete the user currently logged in to the device.
Assigning user role
When you click the user type as role-based, the fields under the Role Based Settings page tab are
enabled. The Role Based Settings page tab is displayed, as shown in Figure 16.
FIGURE 16 Assigning user role
6. Provide the following information:
• Global (non-Context) Config: Click None, Viewer, or Manager to assign a role for the global
configuration pages.