Technical data

ServerIron ADX Graphical User Interface Guide 37
53-1002412-01
Configuring network interfaces and IP addresses
6
Configuring IP addresses for the interface
To configure an IP address for the interface, perform the following steps within the Configure tab.
1. Click Network on the menu bar.
2. From the sidebar, select Interface.
3. From the Summary page, select an interface entry from the list.
4. Click IP addresses.
The IP Address page tab is displayed, as shown in Figure 22.
FIGURE 22 Configuring an IP address
5. Provide the following information:
• Interface ID: Displays the ID assigned to the interface.
• MAC Address: Displays the MAC address of the interface.
• IP Address: Enter the IP address of the network interface.
• Mask: For IPv4, enter the subnet mask in class-based format. For IPv6, select the Use
Prefix check box and enter the prefix length.
• Click Add to save the configuration.
The configured IP address details are displayed in the table.
NOTE
To delete an IP address entry, select an IP address entry from the table and click Delete.
For more information on the IP addresses configuration, refer to the ServerIron ADX Switch and
Router Guide.