Technical data

ServerIron ADX Graphical User Interface Guide 39
53-1002412-01
Configuring static routes
6
The Summary page is displayed, as shown in Figure 24.
FIGURE 24 Static routes summary
The Summary page displays the list of configured static routes. Each entry in the list includes the
destination network, subnet mask, gateway, metric, and distance information.
3. Click New at the bottom of the Summary page.
The Static Route - new page tab is displayed, as shown in Figure 25.
FIGURE 25 Configuring static route
4. Provide the following information:
• IP Version: Click IPv4 or IPv6 to select the version of the IP address. By default, IPv4 is
selected.
• Destination Network: Enter the IP address of the destination route.
• Subnet Mask: Enter the subnet mask in a class-based format.