Technical data

ServerIron ADX Graphical User Interface Guide 45
53-1002412-01
Configuring VLANs
6
• Router Interface: Select the Use check box for the routing interface to locally route the IP
packets from an IP subnet VLAN to the port-based VLAN on the same router. The range is
from 1 through 64. The default value is 24.
• Spanning Tree: Select the Enable check box to enable the spanning tree on the VLAN to
detect and eliminate logical loops in the network.
5. Under Port Members, do the following tasks:
• Tag: Select the check box only if a port connecting the devices is a member of one or more
port-based VLAN.
• Select the ports from the Available Ports list and click Add to add the ports to the Selected
Ports list.
NOTE
To remove a port from the Selected Ports list, click Remove. To remove all the ports from the
selected list, click Remove All.
6. Click Apply to save your entries.
Click Reset to revert the configuration to the previous configured values.
To modify the configured VLAN information, in the Summary table, select an entry and click
Edit or double-click the entry. You can also delete a configuration by clicking Delete.
For more information on the VLAN configuration, refer to the ServerIron ADX Switch and Router
Guide.