Technical data

ServerIron ADX Graphical User Interface Guide 55
53-1002412-01
Virtual servers
7
• Sticky Based on Subnet: Click Enable to send all requests originating from a given subnet
to the same real server.
 Subnet Mask: Enter the subnet mask that is used for the stickiness.
• No Stickness: Click Enable to disable stickiness on the virtual server port.
8. Click Advanced tab to configure the advanced parameters for the virtual server port. The
Advanced tab is displayed, as shown in Figure 39.
FIGURE 39 Configuring advanced parameters
9. Provide the following information:
• Under Connection Management, enter the following information:
 TCP Offload: Click Enable to allow a request from one connection on the client side to
reuse any established connection on the sever side.
 Keepalive Age: Specifies how many minutes a connection on the server side can be
kept alive. The range is from 2 through 60 minutes. The default value is 2 minutes.
 Max Transactions: Specifies the maximum number of HTTP transactions that can be
completed on a connection on the server side. The range is from 1 through
4,294,967,295. The default value is 1.
 Client Keepalive: Click Enable to reuse the connection on the client side.
 None: Click None to disable the TCP offload and client keepalive functionality.