Technical data

ServerIron ADX Graphical User Interface Guide 57
53-1002412-01
Virtual servers
7
The binding page is displayed, as shown in Figure 40.
FIGURE 40 Binding virtual server ports
4. Select the VIPs or ports you want to bind from the Available RS-Ports list and click Bind to move
them to the Bound RS-Ports list.
To unbind the ports, select the ports you want to unbind from the Bound RS-Ports list and click
Unbind. To bind or unbind all the ports, click Bind All or Unbind All.
For more information on binding virtual server ports, refer to the ServerIron ADX Server Load
Balancing Guide.
Enabling or disabling a virtual server
You can enable or disable a virtual server from the Configure Virtual Servers page.
To enable or disable a virtual server on the device, perform the following steps within the Configure
tab.
1. Click Traffic on the menu bar.
2. From the sidebar, select Virtual Servers.
The list of the virtual servers in the system is displayed on the main page, as shown in
Figure 41.
FIGURE 41 Enabling a virtual server
3. Select a virtual server from the Configure Virtual Servers page and perform one of the
following actions: