Technical data

58 ServerIron ADX Graphical User Interface Guide

53-1002412-01

Real servers

• Click Enable at the bottom of the Configure Virtual Servers page to enable the virtual

server.

• Click Disable to disable the virtual server.

For more information on enabling or disabling virtual servers, refer to the ServerIron ADX Server

Load Balancing Guide.

Real servers

Real servers are the actual application servers that handles all the client service requests.

Creating a basic real server

To apply SLB configuration, you must create a basic real server. After you create the basic real

server, you must map the real server to the virtual server to distribute the requests from the client

among the back-end application servers.

To configure a basic real server on the device, perform the following steps within the Configure tab.

1. Click Traffic on the menu bar.

2. From the sidebar, select Real Servers.

The Configure Real Servers page is displayed, as shown in Figure 42.

FIGURE 42 Real server summary

The Configure Real Servers page displays a list of all the configured real servers. Each entry in the

list includes the real server name, IP address, port, and status.

3. Click New at the bottom of the Configure Real Servers page.