Technical data

60 ServerIron ADX Graphical User Interface Guide
53-1002412-01
Real servers
7
Setting predictors for real servers
To configure predictors for real servers on the device, perform the following steps within the
Configure tab.
1. Click Traffic on the menu bar.
2. From the sidebar, select Real Servers.
3. Click New at the bottom of the Configure Real Servers page.
4. Click the Predictors tab.
The Predictors tab is displayed, as shown in Figure 44.
FIGURE 44 Configuring predictors parameters
5. Under Dynamic Weighted, enter the following information:
• Port: Enter the SNMP request host port.
• Community Name: Enter an SNMP community name to restrict SNMP access to all the real
servers.
• Entry ID: Enter the SNMP request entry identification in the fields and the corresponding
SNMP Object ID (OID) value in the SNMP Request OID fields.
6. Under Enhanced Weight, enter the following information:
Least Connection Weight: Enter the weight of the real server relative to other real servers in
terms of the number of connections on the server. The weight is based on the number of
session table entries for TCP or UDP sessions with the real server.
7. Cl ick th e Advanced tab to configure advanced parameters for the real server configuration.