Technical data

66 ServerIron ADX Graphical User Interface Guide
53-1002412-01
Real servers
7
3. Select a real server from the list and click one of the following buttons at the bottom of the
Configure Real Servers page:
• Click Enable at the bottom of the Configure Real Servers page to enable the real server.
• Click Disable to disable the real server.
For more information on enabling or disabling real servers, refer to the ServerIron ADX Server Load
Balancing Guide.
Creating a real server group
A real server group can contain one or more real servers. If there is more than one real server in a
server group, requests are load balanced across all the servers in the group. To assign real servers
to server groups, you establish the IP address of each real server and specify the server groups to
which it belongs.
To create a real server group, perform the following steps within the Configure tab.
1. Click Traffic on the menu bar.
2. From the sidebar, select Server Groups.
The Server Groups page is displayed as shown in Figure 50.
FIGURE 50 Server group summary
The Server Groups page displays a list of configured real server groups. Each entry in the list
includes name of the group, ports added, bound virtual server and ports, and number of real
servers.
3. Click New at the bottom of the Server Groups page.