Technical data

ServerIron ADX Graphical User Interface Guide 67
53-1002412-01
Real servers
7
The Configure Real Server - new page tab is displayed, as shown in Figure 51.
FIGURE 51 Configuring real server
4. Provide the following information:
• Server Group Name: Enter the name of the server group.
• Add Real Servers: Select the real servers from the Available Servers list and click Add to
move the real servers to the Selected Servers list to add server group.
5. Click Apply to save your entries.
Click Reset to revert the configuration to the previous configured values.
To modify the configured real server groups, in the summary table, select an entry and click
Edit or double-click the entry. You can also delete a configuration by clicking Delete.
For more information on configuring real server groups, refer to the ServerIron ADX Server Load
Balancing Guide.
Binding a real server group
To bind a real server group with a virtual server port on the device, perform the following steps
within the Configure tab.
1. Click Traffic on the menu bar.
2. From the sidebar, select Server Groups.
The Server Groups page is displayed.
3. Select a server group entry from the list in the Server Group page and click Bind.
The Virtual Server Bindings page is displayed, as shown in Figure 52.