Technical data

70 ServerIron ADX Graphical User Interface Guide
53-1002412-01
Health checks
7
6. Click Apply to save your entries.
Click Reset to revert the configuration to the previous configured values.
For more information on configuring health checks, refer to the ServerIron ADX Server Load
Balancing Guide.
Creating a port profile
A port profile is a set of attributes that globally defines an application port. Once defined, the port
has the same attributes on all the real and virtual servers that use the port. Port profiles are useful
if you want to globally change the attributes of a port known to the device or you want to globally
define a port that is not known to the device.
Define a port profile to globally configure the port parameters and configure the keepalive health
check.
To create a port profile on the device, perform the following steps within the Configure tab.
1. Click Traffic on the menu bar.
2. From the sidebar, select Port Profiles.
The Port Profiles page is displayed, as shown in Figure 54.
FIGURE 54 Port profile summary