Technical data

ServerIron ADX Graphical User Interface Guide 73
53-1002412-01
Health checks
7
• Retries: Enter the number of retries. The range is from 1 through 5. The default is 2.
6. Click Apply to save your entries.
Click Reset to revert the configuration to the previous configured values.
To modify the configured port profiles, in the summary table, select an entry and click Edit or
double-click the entry. You can also delete a configuration by clicking Delete. However, you
cannot edit or delete port profiles if they are in use.
For more information on configuring port profiles, refer to the ServerIron ADX Server Load
Balancing Guide.
Creating a port policy
Server port policies help to reduce the configuration required for health checks and provide more
flexibility while configuring health checks.
To create a port policy on the device, perform the following steps within the Configure tab.
1. Click Traffic on the menu bar.
2. From the sidebar, select Health Checks, and then select Port Policies.
The Port Policies page is displayed, as shown in Figure 57.
FIGURE 57 Port policies