Home Theater Server User Manual

178 ServerIron ADX Global Server Load Balancing Guide
53-1002437-01
Displaying GSLB information
1
For a description of the information shown by this command, refer to “Displaying the default GSLB
policy” on page 175.
Displaying RTT information
The GSLB ServerIron ADX maintains a cache of RTT information received from the site ServerIron
ADXs through the GSLB protocol. You can display the RTT information the GSLB ServerIron ADX has
related to a client IP address. To display the RTT information, specify a potential client address, as
shown in the following example.
The command in this example shows the RTT prefix information the GSLB ServerIron ADX has
related to client IP address 209.156.100.100. In this case, the GSLB ServerIron ADX has two RTT
entries for zone www.brocade.com.
Syntax: show gslb cache <ip-addr>
The <ip-addr> command specifies a site address.
The following example shows information for a user-configured static entry.
ServerIronADX(config)# show gslb policy
Default metric order: DISABLE
Metric processing order:
1-Round trip time between remote ServerIronADX and client
2-Remote ServerIronADX's session capacity threshold
3-Remote ServerIronADX's available session capacity
4-Server flashback speed
5-Remote ServerIronADX's preference value
6-Least response selection

DNS active-only: DISABLE DNS best-only: DISABLE DNS override: DISABLE
Modify DNS response TTL: ENABLE
DNS TTL: 10 (sec), DNS check interval: 30 (sec)
Remote ServerIronADX status update period: 30 (sec)
Session capacity threshold: 90%, session capacity tolerance: 10%
Round trip time tolerance: 10%, round trip time explore percentage: 5%
Round trip time cache prefix: 20, round trip time cache interval: 120 (sec)
Flashback appl-level delay tolerance: 10%, TCP-level delay tolerance: 10%
ServerIronADX(config)# show gslb cache 209.157.0.0
prefix length = 20, prefix = 209.157.0.0, region = N-AM
prefix source = client-query

brocade.com:
site = sunnyvale, ServerIronADX = slb-1(209.157.22.209), rtt = 5 (x100 usec)
site = atlanta, ServerIronADX = slb-1(192.108.22.112), rtt = 10 (x100 usec)
ServerIronADX(config)# show gslb cache 192.168.2.1
prefix length = 24, prefix = 192.168.2.0, region = N-AM
prefix source = static, client-query
www.brocade.com:
site = atlanta, ServerIronADX = slb-1(192.108.22.111), rtt = 5 (x100 usec)