Home Theater Server User Manual
232 ServerIron ADX Global Server Load Balancing Guide
53-1002437-01
Displaying GSLB for IPv6 configurations
2
Direct response = 0 Query type ANY = 0
Query type A = 56 Query type AAAA = 87
The command returns information about the number of requests for three query types: queries for
IPv4 addresses (A records), queries for IPv6 addresses (AAAA records), and ANY queries. The Direct
Response field shows the total number of DNS queries that the GSLB ServerIron ADX has
responded to directly.
Syntax: show gslb global-stat
Displaying the default GSLB policy
Use the show gslb default command to view the default GSLB policy settings for the ServerIron ADX
including the default processing order of the GSLB policy algorithm and the status of many optional
features including the active-only and best-only DNS response parameters.
To display the default GSLB policy, enter the sho
w gslb default command:
ServerIronADX(config)# show gslb default
Default metric order: ENABLE
Metric processing order:
1-Server health check
2-Remote ServerIronADX's session capacity threshold
3-Round trip time between remote ServerIronADX and client
4-Geographic location
5-Remote ServerIronADX's available session capacity
6-Server flashback speed
7-Least response selection
DNS active-only: DISABLE DNS best-only: DISABLE DNS override: DISABLE
Modify DNS response TTL: ENABLE
DNS TTL: 10 (sec), DNS check interval: 30 (sec)
Remote ServerIronADX status update period: 30 (sec)
Session capacity threshold: 90%, session capacity tolerance: 10%
Round trip time tolerance: 10%, round trip time explore percentage: 5%
Round trip time cache prefix: 20, round trip time cache interval: 120 (sec)
Flashback appl-level delay tolerance: 10%, TCP-level delay tolerance: 10%
Syntax: show gslb default
This display shows the following information.
TABLE 22 GSLB policy information
This field... Displays...
Default algorithm Indicates whether this policy is in effect. The value can be one of the following:
• Disable
• Enable
If the state is Disable, then a user-configured policy is in effect instead.
Metric processing order Indicates the order in which the selection metrics are applied to the server
addresses in the DNS reply.