Technical data

156 ServerIron ADX Firewall Load Balancing Guide
53-1002436-01
Displaying firewall group information
7
DRAFT: BROCADE CONFIDENTIAL
The following lines list the firewalls configured in the firewall group, show the administrative state,
and have distribution values for each firewall:
• The administrative state is shown in the Admin-st column and depends on the results of the
Layer 3 health check (ping) the ServerIron performs when you add the path information for the
firewall. The administrative state can be one of the following:
- 0 – Disabled
- 1 – Enabled
- 2 – Failed
- 3 – Testing
- 4 – Suspect
- 6 – Active
NOTE
Status 5 (Graceful Shutdown) does not apply to firewalls.
• The Hash-distribution field shows how many hash values are assigned to the server. This
information is relevant only when no path information is configured for the firewall group. If the
group is using paths, the hash-distribution value is always 0.
The following lines show traffic statistics for each firewall. The Name field lists the name of the
firewall and the IP field shows the IP address of the firewall. The "Host" indicates the ServerIron
ADX. The “Firewall” indicates the firewall. The Groups field shows the firewall group number.
The statistics are for traffic between the ServerIron ADX and the firewall. The CurConn and TotConn
columns show the total number of connections between the ServerIron ADX and the firewall. A
connection represents both send and receive traffic. (Thus, each connection shown here is
equivalent to two sessions.) The Packets and Octets fields show the total number of packets and
octets exchanged by the ServerIron ADX and the firewall.
Firewall Server Name Admin-st Hash-distribution
fw1 1 0
fw2 6 0
Traffic From<->to Firewall Servers
=====================================
Name: fw1 IP: 10.10.0.1 State: 1 Groups = 2
Host->Firewall Firewall->Host
State CurConn TotConn Packets Octets Packets Octets
Default active 0 0 0 0 0 0
Total 0 0 0 0 0 0
Name: fw2 IP: 10.10.0.2 State: 6 Groups = 2
Host->Firewall Firewall->Host
State CurConn TotConn Packets Octets Packets Octets
Default active 0 0 0 0 0 0
Total 0 0 0 0 0 0