Technical data

34 ServerIron ADX Firewall Load Balancing Guide
53-1002436-01
Configuration examples with Layer 3 routing support
2
DRAFT: BROCADE CONFIDENTIAL
IPv6 example for FWLB with multiple sub-nets and virtual routing interfaces
The following sections show the CLI commands for configuring the basic IPv6 FWLB
implementation in
Figure 8.
FIGURE 9 Basic IPv6 FWLB in multiple sub-nets using multiple routing interfaces
Commands on the external ServerIron ADX
ServerIron ADX> enable
ServerIron ADX# configure terminal
ServerIron ADX(config)# hostname SI-External
SI-External(config)# vlan 10
SI-External(config-vlan-10)# untagged ethernet 4/1 to 4/4
SI-External(config-vlan-10)# router-interface ve 1
SI-External(config-vlan-10)# exit
SI-External(config)# interface ve 1
SI-External(config-ve-1)# ip address 1112::1/64
SI-External(config-ve-1)# exit
SI-External(config)# vlan 20
SI-External(config-vlan-20)# untagged ethernet 4/5 to 4/24
SI-External(config-vlan-20)# router-interface ve 2
SI-External(config-vlan-20)# exit
SI-External(config)# interface ve 2
SI-External(config-ve-2)# ip address 1113::1/64
SI-External(config-ve-2)# exit
SI-External(config)# ip route ::/0 ::/0 1113::3
SI-A
Client
1112::1
Virtual Routing
Interface 1
1112::1/64
Internal
ServerIron
External
ServerIron
Server
Virtual Routing
Interface 2
1112::3
Virtual Routing
Interface 1
1113::1/64
IP:1113::1
Virtual Routing
Interface 2
1113::3
SI-A
SI-B
Layer 3
Firewall-2
IPv6
Layer 3
Firewall-1
IPv6