Computer Hardware User Manual

2-4 SilkWorm 4016 Hardware Reference Manual
Publication Number: 53-1000175-01
Inserting a SilkWorm 4016 into the Chassis
2
Refer to the SFP manufacturer’s documentation for details about SFP modules.
After it is activated, the switch runs self-diagnostic tests such as POST. For more information, see
“Interpreting POST Results” on page 4-3. After the diagnostics are complete, cable the SilkWorm 4016
as directed by the blade server chassis manufacturer’s documentation. The blade server creates a
connection to the switch for configuration.
See Chapter 3, “Configuring the Brocade SilkWorm 4016” for instructions on setting the initial IP
address for the switch module.