Technical data

SilkWorm 4016 Quickstart Guide 5 of 10

53-1000174-01

The nonport (system) LEDs show switch-level information.

1 blade server chassis blade controller status

2 Switch status

3 Power and system status

Unpacking the SilkWorm 4016

To remove the SilkWorm 4016 from its shipping package:

1. Open the shipping box and inspect the contents for damage.

Do not install a damaged unit: if the unit is damaged, contact your sales representative.

2. Remove the cardboard accessory tray that sits on top of the SilkWorm 4016.

3. Remove the switch from the box.

The protective foam ends will slide out with the switch.

4. Remove the foam ends from the switch.

5. Slide the SilkWorm 4016 out of the antistatic sleeve.

Inserting the SilkWorm 4016 into a Blade Server

To insert the SilkWorm 4016 into a blade server chassis:

1. Unpack the SilkWorm 4016 from its shipping box as described earlier.

2. Verify that the chassis I/O bay into which the SilkWorm 4016 is being inserted is empty. If necessary, install the SFP

modules according to the manufacturer’s documentation.

3. Gripping from the top (1) and bottom (2) of the release latch, gently squeeze the latch to free the insertion arm.

Caution

The SilkWorm 4016 is designed to work in a specific I/O bay: usually either chassis I/O bay 3 or chassis I/O

bay 4 only. Do not insert the SilkWorm 4016 into any unsupported I/O bay.