Specifications

hadump
345Fabric OS Version 3.1.x/4.1.x Reference Guide
■ IP and Fibre Channel addresses configured for the switch.
Operands
None.
Example
To displays High Availability feature information:
See Also
haenable
haFailover
haShow
HA State Not
In Sync
The system is unable to synchronize the two CPs, due to the
Standby CP being faulty or another system error. If a fail-over
were to take place at this time, the Standby CP would be
rebooted, and the fail-over will be disruptive.
switch:admin> hadump
Dump HA Data ...
Local CP (Slot 5, CP0): Active
Remote CP (Slot 6, CP1): Standby, Healthy
HA enabled, Heartbeat Up, HA State not in sync
<output truncated>