Specifications

perfClrAlpaCrc
503Fabric OS Version 3.1.x/4.1.x Reference Guide
Operands
This command has the following operands:
Example
To clear CRC count on a particular AL_PA on blade 2 port 15, and then clear CRC
count for all AL_PAs on blade 2 port 15:
See Also
perfShowAlpaCrc
slotnumber
(V4.1.x only)
Specify the slot number for a StorageWorks Core
switch. For all other switches this operand is not
required. The slot number must be followed by a slash
( / ) and the port number, so that each port is
represented by both slot number (1 through 4, or 7
through 10), and port number (0 through 15).
The StorageWorks Core switch has a total of 1–10
slots. Slot number 5 and 6 are control processor cards,
and slot 1 through 4, and 7 through 10, are port
cards. On each port card, there are 16 ports counted
from the bottom, 0 to 15.
portnumber Specify a port number. Valid values for port number
vary depending on the switch type. This operand is
required.
ALPA Specify the AL_PA address if you want to clear the CRC
error counter for a particular device. This operand is
optional.
switch:admin> perfClrAlpaCrc 2/15, 0x59
CRC error count at ALPA 0x59 on port 15 is cleared.
switch:admin>
switch:admin> perfClrAlpaCrc 2/15
This will clear all ALPA CRC Counts on port 15
Do you want to continue? [y|n]y
Please wait ...
All alpa CRC counts are cleared on port 15.
switch:admin>