Specifications

secpolicyadd
705Fabric OS Version 3.1.x/4.1.x Reference Guide
WWN Member Policy Types
The following policy types require members be specified by
WWN address:
■ FCS_POLICY
■ MS_POLICY
■ SERIAL_POLICY
■ FRONTPANEL_POLICY
■ SCC_POLICY
These policy types require members be specified as WWN
strings, Domain ID, or switch names. If Domain ID or switch
names are used, the switches associated must be present in the
fabric or the command fails.
DCC_POLICY Members
The DCC_POLICY_nnn is a list of devices associated with a
specific switch and port combination. An empty DCC_POLICY
does not stop access to the switch. The device is specified with a
WWN string. The switch and port combination must be in the
following format:
<switch><port>
where:
<switch> can be specified using WWN, Domain, or switch
name.
<port> can be specified by port number separated by
commas, and enclosed in either brackets or parenthesis. For
example, (2, 4, 6). Ports enclosed in brackets will include the
devices currently attached to those ports. The following
examples show several ways to specify the port values:
(1-6) = selects ports 1 through 6.
(*) = selects all ports on the switch.
[3, 9] = selects ports 3 and 9 and all devices attached to those
ports.
[1-3, 5] = selects ports 1 though 3 and 5 and all devices
attached to those ports.
[*] = selects all ports on the switch and devices currently
attached to those ports.
OPTIONS_POLICY members
“NoNodeWWNZoning” is the only option.