53-1002652-02 07 December 2012 Brocade 6910 Ethernet Access Switch MIB Reference Supporting R2.2.0.
Copyright © 2012 Brocade Communications Systems, Inc. All Rights Reserved. Brocade, Brocade Assurance, the B-wing symbol, BigIron, DCX, Fabric OS, FastIron, MLX, NetIron, SAN Health, ServerIron, TurboIron, VCS, and VDX are registered trademarks, and AnyIO, Brocade One, CloudPlex, Effortless Networking, ICX, NET Health, OpenScript, and The Effortless Network are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries.
Document History Title Publication number Summary of changes Date Brocade 6910 Ethernet Access Switch MIB Reference 53-1002347-01 New document September 2011 Brocade 6910 Ethernet Access Switch MIB Reference 53-1002347-02 Added documentation fixes for Brocade 6910 Ethernet Access Switch Software Release 2.0.2.9 November 2011 Brocade 6910 Ethernet Access Switch MIB Reference 53-1002347-03 Added documentation fixes for Brocade 6910 Ethernet Access Switch Software Release 2.0.2.
iv Brocade 6910 Ethernet Access Switch MIB Reference 53-1002652-02
Contents About This Document Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Text formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RFC 2674: Definitions of managed objects for bridges with traffic classes, multicast filtering and virtual LAN extensions . . . . . 11 RFC 2737: Entity MIB, Version 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 RFC 2819: Remote Network Monitoring MIB . . . . . . . . . . . . . . . . . .12 RFC 2863: Interfaces Group MIB. . . . . . . . . . . . . . . . . . . . . . . . . . . .12 RFC 2925: Ping MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Software configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Switch IP configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 SNTP server table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Media table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Chapter 7 User Access Agent user access group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System DRAM information group . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Global ARP statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Support for optical monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 System logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 System log server table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About This Document In this chapter • Supported hardware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Getting technical help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Document feedback . . . . . . . . . .
Document conventions This section describes text formatting conventions and important notice formats used in this document.
Getting technical help To contact Technical Support, go to http://www.brocade.com/services-support/index.page for the latest e-mail and telephone contact information. Document feedback Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and completeness of this document. However, if you find an error or an omission, or you think that a topic needs further development, we want to hear from you. Forward your feedback to: documentation@brocade.
xii Brocade 6910 Ethernet Access Switch MIB Reference 53-1002652-02
Chapter 1 Overview of the Brocade 6910 MIB In this chapter • Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Obtaining and installing the Brocade 6910 MIBs . . . . . . . . . . . . . . . . . . . . . . • Standard objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Proprietary objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Standard objects Downloading the MIB from Brocade FTP site You can also download the MIB from the Knowledge Portal. Contact Brocade Technical Support for details. For the latest edition of this document, which contains the most up-to-date information, refer to the Product Manuals tab at www.brocade.com. Importing the Brocade MIB into a UNIX environment You can import the Brocade 6910 MIB into third-party network management applications, such as HP OpenView.
Proprietary objects 1 • router – Contains objects for routing protocols, such as IP, OSPF. (Layer 3 routing protocols will be supported in a future release.) Each of these major nodes are further divided into smaller categories. Table 1 contains a summary of the major categories or MIB object groups under each major node. The MIB object groups can be divided into the individual MIB objects or additional object groups. The column “Object Group Name” presents the name of the MIB object.
1 Structure of this guide Structure of this guide All chapters in this guide contain details about the MIB objects that are in the Brocade 6910 MIB. Each object is presented with its object name and OID, the access type available for that object (for example, read-write or read only), and a description. Objects are grouped according to their function.
Chapter 2 Supported Standard MIBs This chapter summarizes the standard objects that are supported in the Brocade 6910 MIB. It does not document all the supported standard objects, but presents those standard MIBs that are not fully supported. For example, although RFC1213 is supported in the Brocade 6910 MIB, some groups and tables in that MIB are not supported.
2 Supported on Brocade 6910 switches Supported on Brocade 6910 switches RFC compliance - management • • • • • • • • • • • • • • • • • • • • • • • • • RFC 1213 – MIB II RFC 1493 – Bridge MIB RFC 1611 – DNS Server MIB Extensions RFC 1612 – DNS Resolver MIB Extensions RFC 1907 – SNMPv2 MIB RFC 2011 – SNMPv2 IP MIB RFC 2012 – TCP MIB RFC 2013 – UDP MIB RFC 2021 – RMON2 MIB RFC 2096 – IPv4 Forwarding Table MIB RFC 2576 – SNMP Community MIB RFC 2618 – RADIUS Authentication Client MIB RFC 2620 – RADIUS Accounti
LLDP MIB support 2 LLDP MIB support The following MIBs are in the IEEE 802.1AB standard, Station and Media Access Control Connectivity Discovery. • LLDP-EXT-DOT1-MIB • LLDP-EXT-DOT3-MIB Partially supported standards • • • • • • • • “RFC 1213: Management Information Base (MIB-II)” on page 7. • • • • • • • • • • “RFC 2737: Entity MIB, Version 2” on page 12. “RFC 1493: Definitions of managed objects for bridges” on page 8. “RFC 1611: DNS Server MIB extensions” on page 8.
2 RFC 1493: Definitions of managed objects for bridges • • • • • • ip – Replaced by IP-MIB.ip icmp – Replaced by IP-MIB.icmp tcp – Replaced by IP-MIB.icmp udp – Replaced by UDP-MIB.udp egp transmission – Supports other relevant MIBs which are registered under this node, such as EtherLike MIB and Entity MIB RFC 1493: Definitions of managed objects for bridges The following groups are supported on Brocade 6910 switches. Object Group Name Object Identifier dot1dBridge 1.3.6.1.2.1.17 dot1dBase 1.3.6.1.
RFC 1612: DNS Resolver MIB Extensions Object Group Name Object Identifier dnsServCounterOtherErrors 1.3.6.1.2.1.32.1.1.2.12 dnsServOptCounter 1.3.6.1.2.1.32.1.1.3 2 The following object groups in RFC 1611 are not supported on Brocade 6910 switches. • dnsServZone RFC 1612: DNS Resolver MIB Extensions The following groups are supported on Brocade 6910 switches. Object Group Name Object Identifier dnsResMIBObjects 1.3.6.1.2.1.32.2.1 dnsResConfig 1.3.6.1.2.1.32.2.1.1 dnsResCounter 1.3.6.1.2.1.
2 RFC 2096: IP forwarding table MIB Object Group Name Object Identifier probeDownloadAction 1.3.6.1.2.1.16.19.8 probeDownloadStatus 1.3.6.1.2.1.16.19.9 netConfigTable 1.3.6.1.2.1.16.19.11 netDefaultGateway 1.3.6.1.2.1.16.19.12 The following object groups in RFC 2021 are not supported on Brocade 6910 switches.
2 RFC 2674: Definitions of managed objects for bridges with traffic classes, multicast filtering and virtual LAN RFC 2674: Definitions of managed objects for bridges with traffic classes, multicast filtering and virtual LAN extensions The following groups are supported on Brocade 6910 switches. Object Group Name Object Identifier pBridgeMib 1.3.6.1.2.1.17.6 pBridgeMIBObjects 1.3.6.1.2.1.17.6.1 dot1dExtBase 1.3.6.1.2.1.17.6.1.1 dot1dPriority 1.3.6.1.2.1.17.6.1.2 dot1dPortPriorityTable 1.3.6.1.2.
2 RFC 2737: Entity MIB, Version 2 RFC 2737: Entity MIB, Version 2 The following groups are supported on Brocade 6910 switches. Object Group Name Object Identifier entityMIBObjects 1.3.6.1.2.1.47.1 entityPhysical 1.3.6.1.2.1.47.1.1 The following object groups in RFC 2737 are not supported on Brocade 6910 switches. • entityLogical • entityMapping • entityGeneral RFC 2819: Remote Network Monitoring MIB The following groups are supported on Brocade 6910 switches.
RFC 2925: Ping MIB Object Group Name Object Identifier ifStackTable 1.3.6.1.2.1.31.1.2 ifTableLastChange 1.3.6.1.2.1.31.1.5 ifStackLastChange 1.3.6.1.2.1.31.1.6 2 RFC 2925: Ping MIB The following groups are supported on Brocade 6910 switches. Object Group Name Object Identifier pingObjects 1.3.6.1.2.1.80.1 pingCtlTable 1.3.6.1.2.1.80.1.2 pingCtlEntry 1.3.6.1.2.1.80.1.2.1 pingCtlOwnerIndex 1.3.6.1.2.1.80.1.2.1.1 pingCtlTestName 1.3.6.1.2.1.80.1.2.1.2 pingCtlTargetAddressType 1.3.6.1.2.
2 RFC 2925: Remote Trace MIB The following object groups in RFC 2925 are not supported on Brocade 6910 switches. • pingImplementationTypeDomains RFC 2925: Remote Trace MIB The following groups are supported on Brocade 6910 switches. Object Group Name Object Identifier traceRouteObjects 1.3.6.1.2.1.81.1 traceRouteCtlTable 1.3.6.1.2.1.81.1.2 traceRouteCtlOwnerIndex 1.3.6.1.2.1.81.1.2.1.1 traceRouteCtlTestName 1.3.6.1.2.1.81.1.2.1.2 traceRouteCtlTargetAddressType 1.3.6.1.2.1.81.1.2.1.
RFC 3635: Ethernet-like interface types 2 RFC 3635: Ethernet-like interface types The following groups are supported on Brocade 6910 switches. Object Group Name Object Identifier dot3 1.3.6.1.2.1.10.7 dot3StatsTable 1.3.6.1.2.1.10.7.2 dot3PauseTable 1.3.6.1.2.1.10.7.10 The following object groups in RFC 3635 are not supported on Brocade 6910 switches. • • • • dot3CollTable dot3Tests dot3Errors dot3ControlTable RFC 3636: IEEE 802.
2 16 IEEE 802.1ag: Connectivity Fault Management (CFM) MIB Object Group Name Object Identifier dot1agCfmMepIfIndex 1.0.8802.1.1.3.1.7.1.1.2 dot1agCfmMepDirection 1.0.8802.1.1.3.1.7.1.1.3 dot1agCfmMepPrimaryVid 1.0.8802.1.1.3.1.7.1.1.4 dot1agCfmMepActive 1.0.8802.1.1.3.1.7.1.1.5 dot1agCfmMepFngState 1.0.8802.1.1.3.1.7.1.1.6 dot1agCfmMepCciEnabled 1.0.8802.1.1.3.1.7.1.1.7 dot1agCfmMepCcmLtmPriority 1.0.8802.1.1.3.1.7.1.1.8 dot1agCfmMepMacAddress 1.0.8802.1.1.3.1.7.1.1.
RFC 4878: OAM Functions on Ethernet-Like Interfaces MIB Object Group Name Object Identifier dot1agCfmMepTransmitLtmResult 1.0.8802.1.1.3.1.7.1.1.42 dot1agCfmMepTransmitLtmSeqNumber 1.0.8802.1.1.3.1.7.1.1.43 dot1agCfmMepRowStatus 1.0.8802.1.1.3.1.7.1.1.49 dot1agCfmLtrTable 1.0.8802.1.1.3.1.7.2 dot1agCfmMepDbTable 1.0.8802.1.1.3.1.7.3 2 The following object groups in RFC 3636 are not supported on Brocade 6910 switches.
2 18 RFC 4878: OAM Functions on Ethernet-Like Interfaces MIB Brocade 6910 Ethernet Access Switch MIB Reference 53-1002652-02
Chapter Unofficial Standards 3 In this chapter • Service OAM Fault Management Implementation Agreement . . . . . . . . . . . 19 • Performance Monitoring of Loss Measurement Objects . . . . . . . . . . . . . . . 20 • Performance Monitoring of Delay Measurement Objects. . . . . . . . . . . . . . .
3 Performance Monitoring of Loss Measurement Objects Performance Monitoring of Loss Measurement Objects The following tables are supported on Brocade 6910 switches. Frame Loss Measurement Configuration table The mefSoamLmCfgTable includes configuration parameters for Frame Loss Measurement. 20 Name, Identifier, and Syntax Access Description mefSoamLmCfgTable 1.3.6.1.4.1.15007.1.3.1.2.
Performance Monitoring of Loss Measurement Objects 3 Name, Identifier, and Syntax Access Description mefSoamLmCfgEnabled 1.3.6.1.4.1.15007.1.3.1.2.1.1.3 Syntax: TruthValue Read-create This attribute specifies whether the Loss Measurement session is enabled. The value 'true' indicates the Loss Measurement session is enabled. The value 'false' indicates the Loss Measurement session is disabled.
3 22 Performance Monitoring of Loss Measurement Objects Name, Identifier, and Syntax Access Description mefSoamLmCfgDestMacAddress 1.3.6.1.4.1.15007.1.3.1.2.1.1.13 Syntax: MacAddress Read-create The Target or Destination MAC Address Field to be transmitted. If mefSoamLmType is lmCcm, the destination MAC address is always a multicast address indicating the level of the MEG: 01-80-c2-00-00-3y, where y is the level of the MEG. An error is returned if this object is set to any other value.
Performance Monitoring of Loss Measurement Objects 3 Name, Identifier, and Syntax Access Description mefSoamLmCfgStopTimeType 1.3.6.1.4.1.15007.1.3.1.2.1.1.20 Syntax: Integer Read-create This attribute specifies the type of stop time to terminate the SOAM LM session. Only the stop time type ‘relative’ is supported. The value of relative stops the SOAM LM session when the session has been active for the time indicated by mefSoamLmRelativeStopTime.
3 Performance Monitoring of Loss Measurement Objects Current Statistics for Loss Measurement table The mefSoamLmCurrentStatsTable contains statistics for the current Loss Measurement interval. 24 Name, Identifier, and Syntax Access Description mefSoamLmCurrentStatsTable 1.3.6.1.4.1.15007.1.3.1.2.3 Syntax: SEQUENCE OF MefSoamLmCurrentStatsEntry N/A This table contains the results for the current Measurement Interval in a SOAM Loss Measurement session.
Performance Monitoring of Loss Measurement Objects Name, Identifier, and Syntax Access 3 Description mefSoamLmCurrentStatsForwardM Read-only inFlr 1.3.6.1.4.1.15007.1.3.1.2.3.1.7 Syntax: Unsigned32 This attribute contains the minimum one-way frame loss ratio in the forward direction calculated by this MEP for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00). Units are in percent, where 1 = 1/100000.
3 Performance Monitoring of Loss Measurement Objects Name, Identifier, and Syntax Access Description mefSoamLmCurrentStatsInitiated Measurements 1.3.6.1.4.1.15007.1.3.1.2.3.1.19 Syntax: Gauge32 Read-only This attribute contains the count of the number of measurements initiated during this measurement interval. This attribute applies when mefSoamLmType is lmLmm, lmSlm, lm1SlTx or lmCcm. mefSoamLmCurrentStatsComplete dMeasurements 1.3.6.1.4.1.15007.1.3.1.2.3.1.
Performance Monitoring of Loss Measurement Objects 3 Name, Identifier, and Syntax Access Description mefSoamLmHistoricStatsEndTime 1.3.6.1.4.1.15007.1.3.1.2.4.1.2 Syntax: DateAndTime Read-only The time that the measurement interval ended. This object applies regardless of the value of mefSoamLmType. mefSoamLmHistoricStatsElapsedTi me 1.3.6.1.4.1.15007.1.3.1.2.4.1.3 Syntax: TimeInterval Read-only The length of time that the measurement interval ran for, in 0.01 seconds.
3 28 Performance Monitoring of Loss Measurement Objects Name, Identifier, and Syntax Access Description mefSoamLmHistoricStatsBackward MinFlr 1.3.6.1.4.1.15007.1.3.1.2.4.1.14 Syntax: Unsigned32 Read-only This attribute contains the minimum one-way frame loss ratio in the backward direction calculated by this MEP for this measurement interval. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00). Units are in percent, where 1 = 1/100000.
Performance Monitoring of Delay Measurement Objects 3 Performance Monitoring of Delay Measurement Objects The following tables are supported on Brocade 6910 switches. Frame Delay Measurement Configuration table The mefSoamDmCfgTable includes configuration parameters for Frame Delay Measurement. Name, Identifier, and Syntax Access Description mefSoamDmCfgTable 1.3.6.1.4.1.15007.1.3.1.3.
3 30 Performance Monitoring of Delay Measurement Objects Name, Identifier, and Syntax Access Description mefSoamDmCfgEnabled 1.3.6.1.4.1.15007.1.3.1.3.1.1.4 Syntax: TruthValue Read-create This attribute specifies whether the Delay Measurement session is enabled. The value 'true' indicates the Delay measurement session is enabled. The value 'false' indicates Delay Measurement session is disabled.
Performance Monitoring of Delay Measurement Objects 3 Name, Identifier, and Syntax Access Description mefSoamDmCfgDestMacAddress 1.3.6.1.4.1.15007.1.3.1.3.1.1.14 Syntax: MacAddress Read-create The Target or Destination MAC Address Field to be transmitted. If mefSoamDmType is dmDmm, the destination address must be the unicast address of the destination MEP. An error is returned if this object is set to a multicast address.
3 Performance Monitoring of Delay Measurement Objects Name, Identifier, and Syntax Access Description mefSoamDmCfgStopTimeType 1.3.6.1.4.1.15007.1.3.1.3.1.1.21 Syntax: Integer Read-create This attribute specifies the type of stop time to terminate the SOAM DM session. Only the stop time type ‘relative’ is supported. The value of relative stops the SOAM DM session when the session has been active for the time indicated by mefSoamDmRelativeStopTime.
Performance Monitoring of Delay Measurement Objects 3 Name, Identifier, and Syntax Access Description mefSoamDmCurrentStatsEntry 1.3.6.1.4.1.15007.1.3.1.3.3.1 Syntax: MefSoamDmCurrentStatsEntry N/A The conceptual row of mefSoamDmCurrentStatsTable. mefSoamDmCurrentStatsIndex 1.3.6.1.4.1.15007.1.3.1.3.3.1.1 Syntax: Unsigned32 Read-only The index for the current measurement interval for this PM session. An On-Demand test is a one round test, so the index is always 1.
3 Performance Monitoring of Delay Measurement Objects Historic Statistics for Delay Measurement table The mefSoamDmHistoricStatsTable contains statistics for historic intervals in a Delay Measurement session. 34 Name, Identifier, and Syntax Access Description mefSoamDmHistoricStatsTable 1.3.6.1.4.1.15007.1.3.1.3.5 Syntax: SEQUENCE OF MefSoamDmHistoricStatsEntry N/A This table contains the results for historic Measurement Intervals in a SOAM Delay Measurement session.
Performance Monitoring of Delay Measurement Objects 3 Name, Identifier, and Syntax Access Description mefSoamDmHistoricStatsFrameDe layRoundTripMin 1.3.6.1.4.1.15007.1.3.1.3.5.1.5 Syntax: Unsigned32 Read-only This attribute contains the minimum round-trip frame delay calculated by this MEP for this measurement interval. mefSoamDmHistoricStatsFrameDe layRoundTripMax 1.3.6.1.4.1.15007.1.3.1.3.5.1.
3 36 Performance Monitoring of Delay Measurement Objects Brocade 6910 Ethernet Access Switch MIB Reference 53-1002652-02
Chapter 4 Registration In this chapter • Registration objects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Registration objects Registration objects identify the Brocade product that is being managed. The following table presents the objects for product registration. The sysOID will return one of these values. Object Name and Identifier Description ethernetAccessSwitchBr6910 brcdip.1.16.
4 38 Registration objects Brocade 6910 Ethernet Access Switch MIB Reference 53-1002652-02
Chapter 5 Physical Properties of a Device In this chapter • Common objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Common objects This chapter presents the global objects for the general management of a device’s physical properties, such as the current status of the power supply and fan. Refer to the configuration guide for details on power supplies, fans, and other features discussed in this chapter.
5 Common objects Name, Identifier, and Syntax Access Description snChasUnitSerNum brcdIp.1.1.1.4.1.1.2 Syntax: DisplayString Read only The serial number of the unit. If the serial number is unknown or unavailable, then the value should be a zero length string There can be up to 128 characters for the serial number. snChasUnitPartNum brcdIp. 1.1.1.4.1.1.7 Syntax: DisplayString Read only The part number of the chassis for each unit.
Common objects 5 Temperature Refer to the chapter “Traps and Objects to Enable Traps” on page 79 for objects dealing with traps. Name, Identifier, and Syntax Access Description snChasActualTemperature brcdIp.1.1.1.1.18 Syntax: Integer Read only Shows the average temperature of all sensors in all units. Each unit is 0.5 degrees Celsius. Values are from -110 – 250 NOTE: For per-unit (per thermal sensor), see UnitActualTemperature and snAgentTemp2Value instead.
5 42 Common objects Brocade 6910 Ethernet Access Switch MIB Reference 53-1002652-02
Chapter Basic Configuration and Management 6 In this chapter • Software image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 • Software configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 • Media table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Software image Name, Identifier, and Syntax Access Description snAgWriteNVRAM brcdIp.1.1.2.1.3 Syntax: Integer Read-write Saves all configuration information to NVRAM of the agent. The following values can only be read: • normal(1) • error(2) – Operation failed or the flash is bad • writing(4) – Agent is writing NVRAM flash The following value can be written: NOTE: write(3) – Write operation. The agent will return a response even before the write operation is complete.
Software image 6 Name, Identifier, and Syntax Access Description snAgImgFname brcdIp.1.1.2.1.6 Syntax: DisplayString Read-write Shows the name of the image file, including the path, that is currently associated with the system. When the object is not used, the value is a zero length string. It can have up to 127 characters. snAgImgLoad brcdIp.1.1.2.1.7 Syntax: Integer Read-write Downloads or uploads a new software image to the agent.
6 Software image Name, Identifier, and Syntax Access Description snAgTftpServerAddrType brcdIp.1.1.2.1.65 Syntax: InetAddressType Read-write Shows the IP address type of the TFTP server that will be used to download and upload image and configuration files. Supported address types are: • ipv4(1) • ipv6(2) • ipv6z(4) Default: IPv4 snAgTftpServerAddr brcdIp.1.1.2.1.
Software image Name, Identifier, and Syntax Access 6 Description • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • snAgSoftwareFeature (continued) Octet 2, bit 6 – QoS Octet 2, bit 7 – Single Span Octet 3, bit 0 – Fast Span Octet 3, bit 1 – Base L3 Octet 3, bit 2 – static log buffer Octet 3, bit 3 – L2 POS Octet 3, bit 4 – BI15K Octet 3, bit 5 - L2 ATM Octet 3, bit 6 - ATM Octet 3, bit 7 - NETFLOW Octet 4, bit 0 - SFLOW Octet 4, bit 1 - GVRP Octet 4, bit 2 - GARP Octet 4, bit 3 - Dynamic tr
6 Software configuration Software configuration Switch IP configurations Name, Identifier, and Syntax Access Description snAgGblIfIpAddr brcdIp.1.1.2.1.13 Syntax: Integer Read-write Shows the IP address of the interface. snAgGblIfIpMask brcdIp.1.1.2.1.14 Syntax: Integer Read-write Shows the IP address mask of the interface. snAgDefGwayIp brcdIp.1.1.2.1.10 Syntax: Integer Read-write Shows the IP address of the default gateway router.
Media table 6 Name, Identifier, and Syntax Access Description fdrySntpServerAddr brcdIp.1.1.7.1.1.1.1.3 Syntax: InetAddress Read-create The SNTP server IP address. fdrySntpServerVersion brcdIp.1.1.7.1.1.1.1.4 Syntax: Integer32 Read only The SNTP server version. fdrySntpServerRowStatus brcdIp.1.1.7.1.1.1.1.5 Syntax: RowStatus Read-create This variable is used to create, or delete a row in this table.
6 50 Media table Brocade 6910 Ethernet Access Switch MIB Reference 53-1002652-02
Chapter 7 User Access In this chapter • Agent user access group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • General security objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Authorization and accounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • RADIUS general group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • RADIUS server table . . . . . . . . . .
7 Authorization and accounting Name, Identifier, and Syntax Access Description snAgGblEnableTelnetServer brcdIp.1.1.2.1.45 Syntax: Integer Read-write Enables or disables the Telnet server in a device: Disable(0) Enable(1) Default: enable(1) snAgGblTelnetLoginTimeout brcdIp.1.1.2.1.60 Syntax: Integer Read-write Indicates how many minutes you have to log in before Telnet is disconnected. Valid values: 1 – 5 minutes.
RADIUS server table 7 The following objects provide information on RADIUS authentication. Name, Identifier, and Syntax Access Description snRadiusRetransmit brcdIp.1.1.3.12.1.3 Syntax: Integer Read-write Indicates the number of authentication query retransmissions that can be sent to the RADIUS server. Valid values: 1 – 30 Default: 2 snRadiusTimeOut brcdIp.1.1.3.12.1.4 Syntax: Integer Read-write Specifies the number of seconds to wait for authentication reply from the RADIUS server.
7 TACACS general objects Name, Identifier, and Syntax Access Description fdryRadiusServerIndex brcdIp.1.1.8.1.1.1.1.1 Syntax: Unsigned32 N/A The index to the RADIUS server table. A maximum of five RADIUS servers are supported. fdryRadiusServerAddrType brcdIp.1.1.8.1.1.1.1.2 Syntax: InetAddressType Read-create The RADIUS server IP address type – ipv4(1) fdryRadiusServerAddr brcdIp.1.1.8.1.1.1.1.3 Syntax: InetAddress Read-create The RADIUS server IP address. fdryRadiusServerAuthPort brcdIp.1.1.
TACACS server table 7 The following objects provide information on TACACS authentication. Name, Identifier, and Syntax Access Description snTacacsGeneral brcdIp.1.1.3.13.1 None Folder specifying client to server connection parameters. snTacacsKey brcdIp.1.1.3.13.1.4 Syntax: DisplayString Read-write Authentication key displayed as encrypted text. Write operation can only be done if the SET request usesSNMPv3 with data encrypted using privacy key. Valid values: Up to 64 characters as encrypted text.
7 56 TACACS server table Brocade 6910 Ethernet Access Switch MIB Reference 53-1002652-02
Chapter 8 Multi-Device Port Authentication In this chapter • Multi-device port authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Multi-device port authentication Multi-Device Port Authentication is also known as MAC Authentication. The following tables describe the Multi-Device Port Authentication MIB objects. Global multi-device port authentication objects The following global objects are available for Multi-Device Port Authentication.
8 Multi-device port authentication Multi-device port authentication objects The following objects are available for Multi-Device Port Authentication. TABLE 4 Multi-Device Port Authentication Objects Name, Identifier, and Syntax Access Description snMacAuthTable brcdIp.1.1.3.28.3 Syntax: Sequence of SnMacAuthEntry N/A Displays the MAC Authentication table. snMacAuthEntry brcdIp.1.1.3.28.3.1 Syntax: SnMacAuthEntry N/A An entry in the MAC Authentication table. snMacAuthIfIndex brcdIp.1.1.3.28.3.
Multi-device port authentication 8 Name, Identifier, and Syntax Access Description snMacAuthClearMacSessionMac brcdIp.1.1.3.28.4.1.2 Syntax: MacAddress N/A A MAC Session entry indexed by a MAC address. snMacAuthClearMacSessionAction brcdIp.1.1.3.28.4.1.3 Syntax: Integer Read-write valid(0) - An SNMP-GET of this MIB shows that it is a valid command. clear(1) - Represents clearing a MAC Session entry indexed by a MAC address.
8 60 Multi-device port authentication Brocade 6910 Ethernet Access Switch MIB Reference 53-1002652-02
Chapter 9 Traffic Security In this chapter This chapter presents the SNMP MIB objects for various traffic security features such as Dynamic ARP Inspections, DHCP Snooping, and IP Source Guard. • Dynamic ARP Inspection VLAN configuration table. . . . . . . . . . . . . . . . . . . . 61 • Dynamic Host Configuration Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 • IP Source Guard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 Dynamic Host Configuration Protocol Name, Identifier, and Syntax Access Description fdryDaiVlanVLanId brcdIp.1.1.3.35.1.1.1.1 Syntax: VlanIndex N/A This object indicates the VLAN number on which the Dynamic ARP Inspection feature is configured. fdryDaiVlanDynArpInspEnable brcdIp.1.1.3.35.1.1.1.2 Syntax: TruthValue Read-write This object indicates whether Dynamic ARP Inspection is enabled in this VLAN. If this object is set to “true”, Dynamic ARP Inspection is enabled.
Dynamic Host Configuration Protocol 9 • fdryDhcpSnoopBindTable: A table that provides the information for DHCP snooping binding database learned by the device. The DHCP binding database is integrated with the enhanced ARP table. It contains the information of a DHCP entry, such as IP address, MAC address, type, state, port, VLAN ID, and lease time. (To be provided at a later date.) DHCP Snooping global scalar object One scalar object can clear all entries in the DHCP binding database.
9 IP Source Guard DHCP Snooping Interface configuration table Name, Identifier, and Syntax Access Description fdryDhcpSnoopIfConfigTable brcdIp.1.1.3.36.3.1 N/A This table allows you to configure the trust state for DHCP Snooping at each physical interface. fdryDhcpSnoopIfConfigEntry brcdIp.1.1.3.36.3.1.1 N/A A row instance contains the configuration to enable or disable the trust state for DHCP Snooping at each physical interface capable of this feature. It is indexed by the ifIndex.
IP Source Guard 9 IP Source Guard Interface configuration table Name, Identifier, and Syntax Access Description fdryIpSrcGuardIfConfigTable brcdIp.1.1.3.37.1.1 N/A This table enables or disables IP Source Guard on each physical interface. fdryIpSrcGuardIfConfigEntry brcdIp.1.1.3.37.1.1.1 N/A A row indicates if IP Source Guard is enabled or disabled on each physical interface. It is indexed by ifIndex. fdryIpSrcGuardIfEnable brcdIp.1.1.3.37.1.1.1.
9 66 IP Source Guard Brocade 6910 Ethernet Access Switch MIB Reference 53-1002652-02
Chapter 10 MAC-Based VLAN In this chapter • MAC-based VLAN global objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 MAC-based VLAN global objects The following MAC-Based VLAN global objects have been created to provide support through SNMP. TABLE 6 MAC-Based VLAN MIB Global Objects Name, Identifier, and Syntax Access Description fdryMacVlanGlobalObjects brcdIp.1.1.3.32.1 N/A Displays the Global MAC VLAN Objects table. fdryMacVlanGlobalClearOper brcdIp.1.1.3.32.1.
10 68 MAC-based VLAN global objects Brocade 6910 Ethernet Access Switch MIB Reference 53-1002652-02
Chapter 11 Interfaces In this chapter • Switch port information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 • Link Aggregation Group (LAG) table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Switch port information This chapter presents the objects used to define interfaces on a device. Refer to the configuration guide for details on the features discussed in this chapter.
11 70 Switch port information Name, Identifier, and Syntax Access Description snSwIfInfoChnMode brcdIp.1.1.3.3.5.1.6 Syntax: Integer Read-write Indicates if the port operates in half- or full-duplex mode: halfDuplex(1) – Half duplex mode. fullDuplex(2) – Full duplex mode. 100BaseFx, 1000BaseSx, and 1000BaseLx ports operate only at fullDuplex(2). The read-back channel status from hardware can be: • halfDuplex(1) – Half duplex mode. • fullDuplex(2) – Full duplex mode.
Link Aggregation Group (LAG) table 11 Name, Identifier, and Syntax Access Description snSwIfInfoFlowControl brcdIp.1.1.3.3.5.1.20 Syntax: Integer Read-write Indicates if port flow control is enabled: disable(0) enable(1) Default: enabled(1) snSwIfInfoGigType brcdIp.1.1.3.3.5.1.21 Syntax: Integer Read only Applies only to Gigabit Ethernet ports.
11 72 Link Aggregation Group (LAG) table Name, Identifier, and Syntax Access Description fdryLinkAggregationGroupLacpTimeout brcdIp.1.1.3.33.1.1.1.8 Syntax: Integer Read/create The LACP timeout value this LACP LAG will use. fdryLinkAggregationGroupIfIndex brcdIp.1.1.3.29.2.1.1.9 Syntax: InterfaceIndex Read only After a LAG is deployed, this object dIsplays information for the LAG entry in the ifTable. Use this variable to access the entry in the ifTable and ifXTable.
Chapter 12 Monitoring and Logging In this chapter • CPU utilization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • System DRAM information group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Global ARP statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Support for optical monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • System logging. . . . .
12 Global ARP statistics Name, Identifier, and Syntax Access Description snAgSystemDRAMTotal brcdIp.1.1.2.12.4.2 Syntax: Integer Read only The total amount of system dynamic memory, in bytes. snAgSystemDRAMFree brcdIp.1.1.2.12.4.3 Syntax: Integer Read only The amount of free system dynamic memory, in bytes. Global ARP statistics The following are the MIB objects display statistics for ARP. Name, Identifier, and Syntax Access Description snArpStatsTotalReceived brcdIp.1.1.3.22.1.
System logging 12 Name, Identifier, and Syntax Access Description snIfOpticalMonitoringTxPower brcdIp.1.1.3.3.6.1.2 Syntax: DisplayString Read only This object holds the value of the transmitter optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm. snIfOpticalMonitoringRxPower brcdIp.1.1.3.3.6.1.
12 76 System logging Brocade 6910 Ethernet Access Switch MIB Reference 53-1002652-02
Chapter 13 Object for Stacking In this chapter • Agent temperature table for stacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Agent temperature table for stacking The Agent Temperature Table shows temperature information for a module’s temperature sensor in the Stacking devices. Name, Identifier, and Syntax Access Description snAgentTemp2Table brcdIp.1.1.2.13.2 N/A This table lists the temperature of each unit in the stack. snAgentTemp2Entry brcdIp.1.1.2.13.2.
13 78 Agent temperature table for stacking Brocade 6910 Ethernet Access Switch MIB Reference 53-1002652-02
Chapter 14 Traps and Objects to Enable Traps In this chapter • Objects for Brocade 6910 switch traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Standard traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • IronWare traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14 80 Objects for Brocade 6910 switch traps Name, OID, and Syntax Access Description fdryTrapReceiverIndex brcdIp.1.1.10.1.1.1.1.1 Syntax: Unsigned32 None The index to the Trap Receiver Table. fdryTrapReceiverAddrType brcdIp.1.1.10.1.1.1.1.2 Syntax: InetAddressType Read-create Trap Receiver IP address Type. Supported address types are: ipv4(1) ipv6(2) ipv6z(4) Default: ipv4 fdryTrapReceiverAddr brcdIp.1.1.10.1.1.1.1.
Standard traps 14 Standard traps This section present the standard traps supported on devices. System status traps Brocade supports the following traps from RFC 1215: Trap Name and Number Varbind Description coldStart 1.3.6.1.6.3.1.1.5.1 (None) Indicates that the sending protocol entity is re-initializing itself: the agent's configuration or the protocol entity implementation may be altered. warmStart 1.3.6.1.6.3.1.1.5.
14 IronWare traps Traps for RMON events Brocade supports for the following traps for RMON from RFC 2819. Trap Name and Number Varbind Description risingAlarm 1.3.6.1.2.1.16.0.1 alarmIndex, alarmVariable, alarmSampleType, alarmValue, alarmRisingThreshold The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps. fallingAlarm 1.3.6.1.2.1.16.0.
IronWare traps 14 Trap Name and Number Varbind Severity Description snTrapClientLoginReject brcdIp.0.110 snAgGblTrapMessage Informational The SNMP trap that is generated when a login attempt by a telnet or SSH client fails. Format: Security: {snmp | ssh|telnet| web} access [by user ] from src [IP | IPv6 ] rejected, attempts snTrapSysMemoryLowThreshold brcdIp.0.
14 IronWare traps NOTE These traps apply to ports that have DHCP snooping is enabled. Trap Name and Number Varbind Severity Description snTrapSrcIpAddressViolation brcdIp.0.84 snAgGblTrapMessage Minor The SNMP trap that is generated when a rogue device spoofs sourceIP address for denial of service attack. Sample Trap Message: Brocade Trap: Intruder Source IP Address. ; .
IronWare traps 14 Trap Name and Number Varbind Severity Description snTrapOpticalMonitoringOK brcdIp.0.1214 snAgGblTrapMessage Informational The SNMP trap that is generated when an interface transitions from an error to normal state because the alarms/warnings are below the threshold. Sample Trap Message Brocade Trap: Optical Monitoring OK. ; {high | low}. Traps for stacking Brocade supports for the following traps for stacking.
14 Examples Examples RMON event traps The following is an example of how to generate an SNMP trap for an RMON event. If you want to configure a device to send an SNMP trap when the number of broadcast packets exceeds 100, do the following: 1. Configure an RMON alarm with an ID of 1 that checks etherStatsBroadcastPkts for Port 1 every 15 seconds to see if it exceeds a specified delta threshold (i.e., a change compared to the last reading).
MIB Variable Index A authenticationFailure, 81 B brcdSysLogServerAddr, 75 brcdSysLogServerAddrType, 75 brcdSysLogServerEntry, 75 brcdSysLogServerRowStatus, 75 brcdSysLogServerTable, 75 brcdSysLogServerUDPPort, 75 C coldStart, 81 E ethernetAccessSwitchBr6910, 37 F fallingAlarm, 82 fdryDaiIfConfigEntry, 62 fdryDaiIfConfigTable, 62 fdryDaiIfTrustValue, 62 fdryDaiVlanConfigEntry, 61 fdryDaiVlanConfigTable, 61 fdryDaiVlanDynArpInspEnable, 62 fdryDaiVlanVLanId, 62 fdryDhcpSnoopGlobalClearOper, 63 fdryDhcpSno
fdryTrapReceiver CommunityOrSecurityName, 80 fdryTrapReceiverAddr, 80 fdryTrapReceiverAddrType, 80 fdryTrapReceiverEntry, 79 fdryTrapReceiverIndex, 80 fdryTrapReceiverRowStatus, 80 fdryTrapReceiverSecurityLevel, 80 fdryTrapReceiverSecurityModel, 80 fdryTrapReceiverTable, 79 fdryTrapReceiverUDPPort, 80 L linkDown, 81 linkUp, 81 M mefSoamDmCfgCounterEnable, 30 mefSoamDmCfgDestIsMepId, 31 mefSoamDmCfgDestMacAddress, 31 mefSoamDmCfgDestMepId, 31 mefSoamDmCfgDropEligible, 30 mefSoamDmCfgEnabled, 30 mefSoamDmCf
mefSoamLmCurrentStatsIndex, 24 mefSoamLmCurrentStatsInitiatedMeasurements, 26 mefSoamLmCurrentStatsStartTime, 24 mefSoamLmCurrentStatsSuspect, 24 mefSoamLmCurrentStatsTable, 24 mefSoamLmHistoricStatsBackwardAvgFlr, 28 mefSoamLmHistoricStatsBackwardMaxFlr, 28 mefSoamLmHistoricStatsBackwardMinFlr, 28 mefSoamLmHistoricStatsBackwardReceivedFrames, 27 mefSoamLmHistoricStatsBackwardTransmittedFrames, 27 mefSoamLmHistoricStatsCompletedMeasurements, 28 mefSoamLmHistoricStatsElapsedTime, 27 mefSoamLmHistoricStatsEnd
snIfMediaVersion, 49 snIfOpticalMonitoringInfoEntry, 74 snIfOpticalMonitoringInfoTable, 74 snIfOpticalMonitoringRxPower, 75 snIfOpticalMonitoringTemperature, 74 snIfOpticalMonitoringTxBiasCurrent, 75 snIfOpticalMonitoringTxPower, 75 snMacAuthAge, 58 snMacAuthClearGlobalCmd, 57 snMacAuthClearIfCmdAction, 57 snMacAuthClearIfCmdEntry, 57 snMacAuthClearIfCmdIndex, 57 snMacAuthClearIFCmdTable, 57 snMacAuthClearMacSessionAction, 59 snMacAuthClearMacSessionEntry, 58 snMacAuthClearMacSessionIfIndex, 58 snMacAuthCle
