Configuration Guide (Supporting R2.2.0.0) Owner's manual

Brocade 6910 Ethernet Access Switch Configuration Guide 969
53-1002651-02
43
Simple Network Management Protocol
FIGURE 270 Configuring Trap Managers (SNMPv3)
To show configured trap managers:
1. Click Administration, SNMP.
2. Select Configure Trap from the Step list.
3. Select Show from the Action list.
FIGURE 271 Showing Trap Managers
Creating SNMP Notification Logs
Use the Administration > SNMP (Configure Notify Filter - Add) page to create an SNMP notification
log.
CLI References
• “Notification Log Commands” on page 120
• “snmp-server notify-filter” on page 121
• “show nlm oper-status” on page 122
• “show snmp notify-filter” on page 122