Configuration Guide (Supporting R2.2.0.0) Owner's manual

296 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
13
Link Aggregation Commands
show port-channel load-balance
This command shows the load-distribution method used on aggregated links.
Command Mode
Privileged Exec
Example
Console#show port-channel load-balance
Trunk Load Balance Mode: Destination IP address
Console#
TABLE 69 show lacp sysid - display description
Field Description
Channel group A link aggregation group configured on this switch.
System Priority
*
* The LACP system priority and system MAC address are concatenated to form the LAG system ID.
LACP system priority for this channel group.
System MAC Address* System MAC address.