Configuration Guide (Supporting R2.2.0.0) Owner's manual

Brocade 6910 Ethernet Access Switch Configuration Guide 747
53-1002651-02
34
VLAN Trunking
• VLAN Trunking Status – Enables VLAN trunking on the selected interface.
Interface
To enable VLAN trunking on a port or trunk:
1. Click Interface, VLAN Trunking.
2. Click Port or Trunk to specify the interface type.
3. Enable VLAN trunking on any of the ports or on a trunk.
4. Click Apply.
FIGURE 78 Configuring VLAN Trunking