Configuration Guide (Supporting R2.2.0.0) Owner's manual

860 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
42
Configuring User Accounts
4. Click Apply.
FIGURE 182 Configuring AAA Authorization Methods for Exec Service
To display a the configured authorization method and assigned server groups for The Exec service
type:
1. Click Security, AAA, Authorization.
2. Select Show Information from the Step list.
FIGURE 183 Displaying the Applied AAA Authorization Method
Configuring User Accounts
Use the Security > User Accounts page to control management access to the switch based on
manually configured user names and passwords.
CLI References
• “User Accounts” on page 139
Command Usage
• The default guest name is “guest” with the password “guest.” The default administrator name
is “admin” with the password “admin.”
• The guest only has read access for most configuration parameters. However, the administrator
has write access for all parameters governing the onboard agent. You should therefore assign
a new administrator password as soon as possible, and store it in a safe place.
Parameters
These parameters are displayed:
• User Name – The name of the user.
(Maximum length: 32 characters; maximum number of users: 16)
• Access Level – Specifies the user level. (Options: 0 - Normal, 15 - Privileged)