Configuration Guide (Supporting R2.2.0.0) Owner's manual

Brocade 6910 Ethernet Access Switch Configuration Guide 925
53-1002651-02
42
IP Source Guard
Displaying Information for Dynamic IP Source Guard Bindings
Use the Security > IP Source Guard > Dynamic Binding page to display the source-guard binding
table for a selected interface.
CLI References
• “show ip dhcp snooping binding” on page 220
Parameters
These parameters are displayed:
Query by
• Port – A port on this switch.
• VLAN – ID of a configured VLAN (Range: 1-4093)
• MAC Address – A valid unicast MAC address.
• IP Address – A valid unicast IP address, including classful types A, B or C.
Dynamic Binding List
• VLAN – VLAN to which this entry is bound.
• MAC Address – Physical address associated with the entry.
• Interface – Port to which this entry is bound.
• IP Address – IP address corresponding to the client.
• Lease Time – The time for which this IP address is leased to the client.
Interface
To display the binding table for IP Source Guard:
1. Click Security, IP Source Guard, Dynamic Binding.
2. Mark the search criteria, and enter the required values.
3. Click Query
FIGURE 235 Showing the IP Source Guard Binding Table