Administrator's Guide (Supporting Fabric OS v7.3.0) Instruction Manual

• Logins from a device mapped to a specific N_Port or N_Port group (device mapping) always have
priority over unmapped devices that log in to an F_Port that has been mapped to the same
N_Port or N_Port group (port mapping).
• Current device routing (dynamic mapping) may turn out different than your intended mapping
(static mapping), depending on which N_Ports are online and which policies are enabled (for
example, Automatic Port Configuration, Device Load Balancing, Failover, or Failback). Therefore,
it is recommended to map devices to N_Port groups instead of specific N_Ports within a port
group when using device mapping.
NOTE
Automatic Port Configuration and Device Load Balancing cannot be enabled at the same time.
Configuring Ports in Access Gateway Mode
34 Access Gateway Administrator's Guide
53-1003126-01