Configuration Guide User guide

988 BigIron RX Series Configuration Guide
53-1002484-04
Displaying Bidirectional Forwarding Detection information
30
Interface The logical port on which the peer is known.
Holddown The interval after which the session will transition to the down state if no
message is received.
Interval The interval at which the local router sends BFD messages to the remote
peer.
RH Heard from remote.
Registered Protocols Specifies which protocols are registered to use BFD on this port.
Local
Disc Value of the “local discriminator” field in the BFD Control Message as
used by the local router in the last message sent.
Diag Value of the “diagnostic” field in the BFD Control Message as used by
the local router in the last message sent.
Demand Value of the “demand” bit in the BFD Control Message as used by the
local router in the last message sent.
Poll Value of the “poll” bit in the BFD Control Message as used by the local
router in the last message sent.
MinTxInterval The interval in microseconds between which the router negotiates to
send a BFD message from this local neighbor port to its peer.
MinRxInterval The interval in microseconds that the neighbor router waits to receive a
BFD message from its peer on this local port.
Multiplier The number of times that the neighbor router will wait for the
MinRxInterval time on this port before it determines that its peer router
is non-operational.
Remote
Disc Value of the “local discriminator” field in the BFD Control Message as
received in the last message sent by the remote peer.
Diag Value of the “diagnostic” field in the BFD Control Message as received in
the last message sent by the remote peer.
Demand Value of the “demand” bit in the BFD Control Message as received in the
last message sent by the remote peer.
Poll Value of the “poll” bit in the BFD Control Message as received in the last
message sent by the remote peer.
MinTxInterval The interval in microseconds between which the router negotiates to
send a BFD message from the remote neighbor port to its peer.
MinRxInterval The interval in microseconds that the neighbor router waits to receive a
BFD message from its peer on this remote port.
Multiplier The number of times that the remote neighbor router will wait for the
MinRxInterval time on this port before it determines that its peer router
is non-operational.
Stats: Rx Total number of BFD control messages received from the remote peer.
Stats: Tx Total number of BFD control messages sent to the remote peer.
Stats: SessionUpCount The number of times the session has transitioned to the UP state.
TABLE 158 Display of BFD neighbor detail information (Continued)
This field... Displays...