Configuration Guide User guide

ManualsBrandsBrocade ManualsComputer AccessoriesBigIron RX Series

1181

1108 BigIron RX Series Configuration Guide

53-1002484-04

Using FDP

The show fdp neighbor detail command displays the following information.

Displaying FDP entries

To display the detailed neighbor information for a specific device, enter a command such as the

following.

Syntax: show fdp entry * | <device-id>

TABLE 181 Detailed FDP and CDP neighbor information

This line... Displays...

Device ID The hostname of the neighbor. In addition, this line lists the VLAN

memberships and other VLAN information for the neighbor port that

sent the update to this device.

Entry address(es) The Layer 3 protocol addresses configured on the neighbor port that

sent the update to this device. If the neighbor is a Layer 2 Switch, this

field lists the management IP address.

Platform The product platform of the neighbor.

Capabilities The role the neighbor is capable of playing in the network.

Interface The interface on which this device received an FDP or CDP update for

the neighbor.

Port ID The interface through which the neighbor sent the update.

Holdtime The maximum number of seconds this device can keep the information

received in the update before discarding it.

Version The software version running on the neighbor.

BigIron RXA# show fdp neighbor detail

Device ID: BigIronB configured as default VLAN1, tag-type8100

Entry address(es):

Platform: BigIron RX Router, Capabilities: Router

Interface: Eth 2/9

Port ID (outgoing port): Eth 2/9 is TAGGED in following VLAN(s):

9 10 11

Holdtime : 176 seconds

Version :

Brocade, Inc. Router, IronWare Version 02.6.01b1T53 Compiled on Aug 29

2002 at 10:35:21 labeled as B2R07601b1

BigIron RXA# show fdp entry BigIronRXB

Device ID: BigIron RXB configured as default VLAN1, tag-type8100