Configuration Guide User guide

1394 BigIron RX Series Configuration Guide
53-1002484-04
Syslog messages
A
Notification OSPF interface state changed,
rid
<router-id>, intf addr <ip-addr>,
state
<ospf-state>
Indicates that the state of an OSPF interface
has changed.
The
<router-id> is the router ID of the device.
The
<ip-addr> is the interface’s IP address.
The
<ospf-state> indicates the state to which
the interface has changed and can be one of
the following:
• down
• loopback
• waiting
• point-to-point
• designated router
• backup designated router
• other designated router
• unknown
Notification OSPF virtual intf state changed,
rid
<router-id>, area <area-id>,
nbr
<ip-addr>, state <ospf-state>
Indicates that the state of an OSPF virtual
routing interface has changed.
The
<router-id> is the router ID of the router
the interface is on.
The
<area-id> is the area the interface is in.
The
<ip-addr> is the IP address of the OSPF
neighbor.
The
<ospf-state> indicates the state to which
the interface has changed and can be one of
the following:
• down
• loopback
• waiting
• point-to-point
• designated router
• backup designated router
• other designated router
• unknown
TABLE 242 Brocade Syslog messages (Continued)
Message level Message Explanation