Configuration Guide User guide

1396 BigIron RX Series Configuration Guide
53-1002484-04
Syslog messages
A
Notification OSPF intf config error, rid <router-id>,
intf addr
<ip-addr>,
pkt src addr
<src-ip-addr>,
error type
<error-type>, pkt type <pkt-type>
Indicates that an OSPF interface
configuration error has occurred.
The
<router-id> is the router ID of the device.
The
<ip-addr> is the IP address of the
interface on the device.
The
<src-ip-addr> is the IP address of the
interface from which the device received the
error packet.
The
<error-type> can be one of the following:
• bad version
• area mismatch
• unknown NBMA neighbor
• unknown virtual neighbor
• authentication type mismatch
• authentication failure
• network mask mismatch
• hello interval mismatch
• dead interval mismatch
• option mismatch
• unknown
The
<packet-type> can be one of the
following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
TABLE 242 Brocade Syslog messages (Continued)
Message level Message Explanation