Configuration Guide User guide

BigIron RX Series Configuration Guide 1401
53-1002484-04
Syslog messages
A
Notification OSPF virtual intf retransmit, rid <router-id>,
intf addr
<ip-addr>, nbr rid <nbr-router-id>,
pkt type is
<pkt-type>, LSA type <lsa-type>,
LSA id
<lsa-id>, LSA rid <lsa-router-id>
An OSPF interface on the device has
retransmitted a Link State Advertisement
(LSA).
The
<router-id> is the router ID of the device.
The
<ip-addr> is the IP address of the
interface on the device.
The
<nbr-router-id> is the router ID of the
neighbor router.
The
<packet-type> can be one of the
following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
The
<lsa-type> is the type of LSA.
The
<lsa-id> is the LSA ID.
The
<lsa-router-id> is the LSA router ID.
Notification OSPF originate LSA, rid
<router-id>,
area
<area-id>, LSA type <lsa-type>,
LSA id
<lsa-id>,
LSA router id
<lsa-router-id>
An OSPF interface has originated an LSA.
The
<router-id> is the router ID of the device.
The
<area-id> is the OSPF area.
The
<lsa-type> is the type of LSA.
The
<lsa-id> is the LSA ID.
The
<lsa-router-id> is the LSA router ID.
Notification OSPF max age LSA, rid
<router-id>,
area
<area-id>, LSA type <lsa-type>,
LSA id
<lsa-id>, LSA rid <lsa-router-id>
An LSA has reached its maximum age.
The
<router-id> is the router ID of the device.
The
<area-id> is the OSPF area.
The
<lsa-type> is the type of LSA.
The
<lsa-id> is the LSA ID.
The
<lsa-router-id> is the LSA router ID.
Notification OSPF LSDB overflow, rid
<router-id>,
limit
<num>
A Link State Database Overflow (LSDB)
condition has occurred.
The
<router-id> is the router ID of the device.
The
<num> is the number of LSAs.
Notification OSPF LSDB approaching overflow,
rid
<router-id>, limit <num>
The software is close to an LSDB condition.
The
<router-id> is the router ID of the device.
The
<num> is the number of LSAs.
TABLE 242 Brocade Syslog messages (Continued)
Message level Message Explanation