Configuration Guide User guide

1424 BigIron RX Series Configuration Guide
53-1002484-04
BGP4
E
maximum-paths <num> “Changing the maximum number of shared BGP4
paths” on page 845
med-missing-as-worst “Treating missing MEDs as the worst MEDs” on
page 845
multipath ebgp | ibgp | multi-as “Customizing BGP4 load sharing” on page 846
neighbor
<ip-addr> |<peer-group-name> password [0 |
1]
<string>
“Encryption example” on page 852
neighbor
<ip-addr> | <peer-group-name> capability orf
prefixlist [send | receive]
“Enabling cooperative filtering” on page 885
neighbor
<ip-addr> | <peer-group-name>
soft-reconfiguration inbound
“Enabling soft reconfiguration” on page 893
neighbor
<ip-addr> | <peer-group-name>
unsuppress-map
<map-name>
“Removing route dampening from suppressed
neighbor routes” on page 851
neighbor
<ip-addr>|<peer-group-name>
[advertisement-interval
<num>]
[capability orf prefixlist [send | receive]]
[default-originate [route-map
<map-name>]]
[description
<string>]
[distribute-list in | out
<num,num,...> | <acl-num> in |
out]
[ebgp-multihop [
<num>]]
[filter-list in | out
<num,num,...> | <acl-num> in | out |
weight]
[maximum-prefix
<num> [<threshold>] [teardown]]
[next-hop-self]
[nlri multicast | unicast | multicast unicast]
[password [0 | 1]
<string>]
[prefix-list
<string> in | out]
[remote-as
<as-number>]
[remove-private-as]
[route-map in | out
<map-name>]
[route-reflector-client]
[send-community]
[soft-reconfiguration inbound]
[shutdown]
[timers keep-alive
<num> hold-time <num>]
[unsuppress-map
<map-name>]
[update-source
<ip-addr> | ethernet <portnum> |
loopback
<num> | ve <num>]
[weight
<num>]
“Configuring BGP4 neighbors” on page 846
“Configuring a peer group” on page 855
neighbor
<ip-addr> distribute-list <name-or-num> in | out “Defining neighbor distribute lists” on page 876
neighbor
<ip-addr> peer-group <peer-group-name> “Applying a peer group to a neighbor” on page 856
neighbor
<ip-addr> route-reflector-client “Configuration procedures” on page 869
neighbor
<ip-addr> shutdown “Administratively shutting down a session with a
BGP4 neighbor” on page 856
neighbor
<peer-group-name> peer-group “Configuring a peer group” on page 855
network
<ip-addr> <ip-mask> [route-map <map-name>]
| [weight
<num>] | [backdoor]
“Specifying a list of networks to advertise” on
page 857
“Specifying a route map name when configuring
BGP4 network information” on page 857
Commands See ...