Configuration Guide User guide

BigIron RX Series Configuration Guide 1429
53-1002484-04
IP
E
ip mtu <num> “Changing the maximum transmission unit on an
individual interface” on page 184
ip proxy-arp “Enabling proxy ARP” on page 193
ip redirect “Disabling ICMP redirect messages” on page 200
ip route
<dest-ip-addr> <dest-mask> |
<dest-ip-addr>/<mask-bits> <next-hop-ip-addr> |
ethernet
<slot/port> | ve <num> [<metric>] [tag <num>]
[distance
<num>]
“Configuring a static IP route” on page 203
ip route
<ip-addr> <ip-mask> |
<dest-ip-addr>/<mask-bits> null0 [<metric>] [tag
<num>] [distance <num>]
“Configuring a “null” route” on page 204
ip router-id
<ip-addr> “Changing the router ID” on page 185
Ip show-portname “Displaying interface name in Syslog” on page 225
ip show-subnet-length “Changing the network mask display to prefix format”
on page 166
ip source-route “Disabling forwarding of IP source-routed packets” on
page 197
ip radius source-interface
ethernet
<slot/port> |
loopback
<num> |
ve
<num>
“Specifying a single source interface for Telnet,
TACACS, TACACS+, or RADIUS packets” on page 186
ip tacacs source-interface
ethernet
<slot/port> |
loopback
<num> |
ve
<num>
“Specifying a single source interface for Telnet,
TACACS, TACACS+, or RADIUS packets” on page 186
ip telnet source-interface ethernet
<slot/port> |
loopback
<num> |
ve
<num>
“Specifying a single source interface for Telnet,
TACACS, TACACS+, or RADIUS packets” on page 186
ip ttl
<1-255> “Changing the TTL threshold” on page 197
rate-limit-arp
<num> “Rate limiting ARP packets” on page 190
router-interface ve
<num> “Assigning an IP address to a virtual interface” on
page 165
show arp [ethernet
<slot/port> | mac-address
<xxxx.xxxx.xxxx> [<mask>] | <ip-addr> [<ip-mask>]]
[
<num>] [| begin<expression> | exclude<expression> |
include
<expression>]
“Displaying the ARP cache” on page 226
show ip “Displaying global IP configuration information” on
page 222
show ip cache [
<ip-addr>] [| begin<expression> |
exclude
<expression> | include<expression> ]
“Displaying the forwarding cache” on page 228
show ip interface [ethernet
<slot/port>] | [loopback
<num>] | [ve <num>]
“Displaying IP interface information” on page 224
show ip route
<num> | [<ip-addr> [<ip-mask>] [debug |
detail | longer] ] | connected | bgp | isis | ospf | rip |
static | summary ] [| begin
<expression> |
exclude
<expression> | include<expression>]
“Displaying the IP route table” on page 229
Commands See ...