Configuration Guide User guide

1436 BigIron RX Series Configuration Guide
53-1002484-04
IPv6 multicast
E
IPv6 multicast
IPv6 RIPng
Commands See ...
ipv6 router pim “Enabling MLDv2” on page 1360
ipv6 pim-sparse “Enabling MLDv2” on page 1360
ipv6 mld port-version
<version-number> “Enabling MLDv2” on page 1360
ssm-enable “Enabling source specific multicast” on page 1360
ipv6 mld query-interval
<seconds> “Setting the query interval” on page 1361
ipv6 mld max-response-time
<seconds> “Setting the maximum response time” on page 1361
ipv6 mld llqc
<seconds> “Setting the last listener query count” on page 1361
ipv6 mld llqi
<seconds> “Setting the last listener query interval” on
page 1361
ipv6 mld robustness
<seconds> “Setting the robustness” on page 1362
ipv6 mld version
<version-number> “Setting the version” on page 1362
“Setting the interface MLD version” on page 1363
mld port-ver
<version-number> “Specifying a port version” on page 1362
ipv6 mld static-group
<multicast-group-address>
[ethernet
<port-number> [ethernet <port-number> | to
<port-number>]* ]
“Specifying a static group” on page 1362
show ipv6 mld group “Displaying MLD group information” on page 1363
show ipv6 mld interface [
<port-number>] “Displaying MLD definitions for an interface” on
page 1364
show ipv6 mld traffic “Displaying MLD traffic” on page 1364
clear ipv6 mld traffic ethernet
<slot-number>/<port-number> | ve <ve-number>
“Clearing IPv6 MLD traffic” on page 1365
Commands See ...
clear ipv6 rip routes “Clearing RIPng routes from IPv6 route table” on
page 1215
distribute-list prefix-list
<name> in | out <interface>
<port>
“Controlling distribution of routes through RIPng” on
page 1213
ipv6 rip default-information only | originate “Configuring default route learning and advertising”
on page 1212
ipv6 rip enable “Configuring RIPng” on page 1209
ipv6 rip metric-offset [out]
<1 – 16> “Changing the metric of routes learned and
advertised on an interface” on page 1213
ipv6 rip summary-address
<ipv6-prefix>/<prefix-length> “Advertising IPv6 address summaries” on page 1212
ipv6 router rip “Enabling RIPng” on page 1210