Configuration Guide User guide

BigIron RX Series Configuration Guide 1437
53-1002484-04
IPv6 OSPFv3
E
IPv6 OSPFv3
poison-local-routes “Configuring poison reverse parameters” on
page 1214
poison-reverse “Configuring poison reverse parameters” on
page 1214
redistribute bgp | connected | isis | ospf | static [metric
<number>]
“Redistributing routes into RIPng” on page 1213
show ipv6 rip “Displaying RIPng configuration” on page 1215
show ipv6 rip route [
<ipv6-prefix>/<prefix-length> |
<ipv6-address>]
“Displaying RIPng routing table” on page 1216
timers
<update-timer> <timeout-timer>
<hold-down-timer> <garbage-collection-timer>
“Configuring RIPng timers” on page 1210
Commands See ...
Commands See ...
area <number> | <ipv4-address> “Assigning OSPFv3 areas” on page 1303
area
<number> | <ipv4-address> stub <metric>
[no-summary]
“Assigning a totally stubby area” on page 1304
area
<number> | <ipv4-address> virtual-link <router-id> “Configuring virtual links” on page 1305
area
<number> | <ipv4-address> virtual-link <router-id>
[dead-interval
<seconds> | hello-interval <seconds> |
retransmit-interval
<seconds> | transmit-delay
<seconds>]
“Modifying virtual link parameters” on page 1306
auto-cost reference-bandwidth
<number> “Changing the reference bandwidth for the cost on
OSPFv3 interfaces” on page 1307
auto-cost reference-bandwidth
<number> “Modifying exit overflow interval” on page 1318
default-information-originate [always] [metric
<value>]
[metric-type
<type>]
“Configuring default route origination” on page 1315
default-metric
<number> “Modifying default metric for routes redistributed into
OSPF version 3” on page 1310
distance external | inter-area | intra-area
<distance> “Configuring administrative distance based on route
type” on page 1317
distribute-list prefix-list
<name> in [<interface>] “Configuring an OSPFv3 distribution list using an IPv6
prefix list as input” on page 1313
distribute-list route-map
<name> in “Configuring an OSPFv3 distribution list using an IPv6
prefix list as input” on page 1313
external-lsdb-limit
<entries> “Modifying external link state database limit” on
page 1318
ipv6 ospf area
<number> | <ipv4-address> “Assigning interfaces to an area” on page 1305
ipv6 prefix-list
<name> [seq <seq-value>] [description
<string>] deny | permit <ipv6-addr>/<mask-bits> [ge
<ge-value>] [le <le-value>]
“Configuring an OSPFv3 distribution list using a route
map as input” on page 1314