Configuration Guide User guide

1438 BigIron RX Series Configuration Guide
53-1002484-04
IPv6 OSPFv3
E
pv6 router ospf “Enabling OSPFv3” on page 1302
log-status-change “Disabling or reenabling event logging” on page 1319
metric-type type1 | type2 “Modifying metric type for routes redistributed into
OSPF version 3” on page 1311
redistribute bgp | connected | isis [level-1 | level-1-2 |
level-2] | rip | static [metric
<number> | metric-type
<type>]
“Redistributing routes into OSPFv3” on page 1308
redistribute bgp | connected | isis | rip | static [route-map
<map-name>]
“Redistributing routes into OSPFv3” on page 1308
show ipv6 ospf area [
<area-id>] “Displaying OSPFv3 area information” on page 1320
show ipv6 ospf database [advrtr
<ipv4-address> |
as-external | extensive | inter-prefix | inter-router |
intra-prefix | link | link-id
<number> | network | router
[scope
<area-id> | as | link]]
“Displaying OSPFv3 database Information” on
page 1321
show ipv6 ospf interface [ethernet
<port> | loopback
<number> | tunnel <number> | ve <number>]
“Displaying OSPFv3 interface information” on
page 1326
show ipv6 ospf memory “Displaying OSPFv3 memory usage” on page 1329
show ipv6 ospf neighbor [router-id
<ipv4-address>] “Displaying OSPFv3 neighbor information” on
page 1330
show ipv6 ospf redistribute route [
<ipv6-prefix>] “Displaying routes redistributed into OSPFv3” on
page 1332
show ipv6 ospf routes [
<ipv6-prefix>] “Displaying OSPFv3 route information” on page 1333
show ipv6 ospf spf node area [
<area-id>] “Displaying OSPFv3 SPF information” on page 1335
show ipv6 ospf spf table area
<area-id> “Displaying OSPFv3 SPF information” on page 1335
show ipv6 ospf spf tree area
<area-id> “Displaying OSPFv3 SPF information” on page 1335
show ipv6 ospf virtual-link “Displaying IPv6 OSPF virtual link information” on
page 1338
show ipv6 ospf virtual-neighbor “Displaying IPv6 OSPF virtual link information” on
page 1338
summary-address
<ipv6-prefix>/<prefix-length> “Configuring external route summarization” on
page 1311
timers lsa-group-pacing
<seconds> “Configuring the OSPFv3 LSA pacing interval” on
page 1317
timers spf
<delay> <hold-time> “Modifying shortest path first timers” on page 1316
virtual-link-if-address interface ethernet
<port> |
loopback
<number> | tunnel <number> | ve <number>
“Assigning a virtual link source address” on
page 1306
Commands See ...