Configuration Guide User guide

BigIron RX Series Configuration Guide 1439
53-1002484-04
IS-IS
E
IS-IS
Commands See ...
address-family ipv4 unicast “Address family configuration level” on page 950
area-password
<string> “Configuring an area password” on page 954
clear isis all | counts | neighbor | route | traffic “Clearing IS-IS information” on page 980
csnp-interval
<secs> “Changing the sequence numbers PDU interval” on
page 955
default-information-originate [route-map
<name>] “Enabling advertisement of a default route” on
page 959
default-metric
<number> “Changing the default redistribution metric” on
page 962
distance
<number> “Changing the administrative distance for IPv4 IS-IS”
on page 960
domain-password
<string> “Configuring a domain password” on page 954
exit-address-family “Address family configuration level” on page 950
hello padding [point-to-point] “Globally disabling or re-enabling hello padding” on
page 957
“Disabling and enabling hello padding on an
interface” on page 967
hostname “Disabling or re-enabling display of hostname” on
page 955
ip router isis “Disabling and enabling IS-IS on an interface” on
page 965
ipv4 router isis “Interface level” on page 951
isis circuit-type level-1 | level-1-2 | level-2 “Changing the IS-IS level on an interface” on
page 966
isis hello-interval
<num> [level-1-only | level-2-only] “Changing the hello interval” on page 967
isis hello-multiplier
<num> [level-1-only | level-2-only] “Changing the hello multiplier” on page 967
isis metric
<num> “Changing the metric added to advertised routes” on
page 968
isis passive “Disabling or re-enabling formation of adjacencies”
on page 965
isis password
<string> “Limiting access to adjacencies with a neighbor” on
page 966
isis priority
<num> [level-1-only | level-2-only] “Setting the priority for designated IS election” on
page 965
is-type level-1-only | level-1-2 | level-2-only “Changing the IS-IS Level globally” on page 954
log-adjacency-changes “Logging adjacency changes” on page 958
lsp interval
<seconds> “Changing the LSP interval and retransmit interval”
on page 956
lsp-gen-interval
<secs> “Changing the LSP generation interval” on page 956
lsp-refresh-interval
<secs> “Changing the LSP refresh interval” on page 956