Configuration Guide User guide

BigIron RX Series Configuration Guide 1443
53-1002484-04
Multi-Chassis Trunking
E
Multi-Chassis Trunking
Commands See ...
lag <name> [static | dynamic] [id <number>] “Creating and deploying the LAGs” on page 533
ports ethernet [slot/port] | to | [slot/port]
primary-port
<slot/port>
deploy [forced | passive]
port-name
<text> ethernet <slot/port> | pos <slot/port>
route-only “Enabling Layer 2 switching” on page 536
vlan
<vlan-id> “Creating VLANs for client traffic” on page 536
untagged ethernet [slot/port] | to | [slot/port]
tagged ethernet [slot/port] | to | [slot/port]
vlan
<vlan-id>name <vlan-name> “Creating the session VLAN” on page 536
hostname
<string> “Assigning the host name (optional)” on page 537
enable “Enabling the interfaces” on page 537
port-name
<text> “Assigning a port name (optional)” on page 537
interface [ve
<ve-id>] “Adding a VE interface” on page 538
ip address
<ip-addr> <ip-mask>
cluster
<cluster-name> <cluster-id> “Configuring the cluster operation mode” on
page 538
rbridge-id
<id>
session-vlan
<vlan-id>
member-vlan
<x>to <y>
icl
<icl-name> ethernet <x/y>
peer
<peer-ip> rbridge-id <peer-rbridge> icl <map-icl>
deploy
client
<client-name> “Configuring the MCT cluster clients” on page 539
client-interface
<interface> interface : ethernet <x/y>
peer
<peer-ip> disable-fast-failover “Creating and deploying the LAGs” on page 541
client-isolation loose “Configuring client isolation mode” on page 545
client-isolation strict
client-interfaces shutdown “Shutting down all the client interfaces” on page 546
keep-alive-vlan
<vlan-id> “Configuring a Keepalive VLAN” on page 546
peer
<peer-ip> timers keep-alive <keep-alive time>
hold-time
<hold-time>
“Setting the keepalive timers and hold time for the
peers” on page 547
show cluster [
<name> | <client-id>] “Displaying detailed cluster information” on
page 547
show cluster
<name> client <client-rbridge> “Displaying cluster client reachability information” on
page 548